As an Amazon Associate I earn from qualifying purchases.
Powerbuilt #ad - Tool set for removal and installation of harmonic balancers that have threaded holes. Installation pieces: national fine center screw, thrust bearing, forcing nut and jaw nut.
Tool solutions for most all situations. 4pc axle nut socket set K. Strong and dependable enough to last a lifetime. Built to exceed tool standards. Removal pieces: combo yoke, national fine center screw, center point piece and bolt pairs.
Powerbuilt #ad - Strong and dependable enough to last a lifetime. Kit services: many domestic V8 and V6 engines with harmonic balancers with threaded holes.
Tool solutions for most all situations. Includes special puller for removal of the crankshaft pulley on many 1990 and newer Chryslers engines. Kit 45 includes 33-piece for removal and installation of harmonic balancers with threaded holes.
ABN #ad - Versatile: also works on gear pulleys and steering wheels; bearing-centered circular 2/3-way and an assortment of metric and fractional bolts and adapters provide wide coverage; Fits L98 & LT series engines, GM LS1 with aftermarket 3-bolt style balancer; If your balancer has threaded drilled and tapped holes in the front to attach supplied pulling bolts to, it is compatible.
Practical: use the abn universal harmonic balancer puller & installer 52-Piece Tool Kit – Master Balancer & Pulley Removal/Installation Set to safely remove harmonic balancers and drive pulleys which are pressed fitted onto the crank shaft without damaging your vehicle.
Easy storage: heavy-duty 13” x 9. 5” x 2. 5” 33cm x 24. 1cm x 6. 4cm plastic blow-molded carrying case for easy transportation, simple storage, and quick organization; Each slot has an embossed size labeling for easy identification. Specifications: heavy duty 3/4" diameter forcing screw internally threaded to fit the eight adapters to install harmonic balancers; adapters m16 x 2. 0, 9/16-18, m8 x 1. 25 x 65mm, 7/16-20; black screws m10 x 1.
OEMTOOLS #ad - Easy to use: unique spring-loaded jaws hold the legs in place when positioning the harmonic balancer removal tool, making removing and reinstalling the harmonic balancer a relatively simple and inexpensive process. Instructions and storage case included: Our harmonic balancer pulley removal tool comes with easy-to-follow instructions and a durable blow-molded carrying case; Easily take this harmonic balancer puller set from job to job.
Product specifications: includes puller body, 3 jaw retaining pins, 6-1/2", 5-13/32", 3-jaw puller, 3 Wave Washers, 4 Pressure Screw Adapter Rods 4", and 7-13/32"; Blow-Molded Carrying Case.
For pressed-on harmonic balancers: harmonic balancer tool is designed for pressed-on harmonic balancers with a single center retainer bolt; Uses 3 jaw puller arms with significant bite to grip and remove spoke-style pressed-on harmonic balancers.
Powerbuilt #ad - For use on balancers found on many automotive and light truck applications. Tool set for removal and installation of harmonic balancers that have threaded holes.
The right tool for the job. Storage case includes usage photos. Precision-built to meet or exceed ANSI standards. Durable storage case with step-by-step instructions.
OEMTOOLS #ad - Easy to use: assemble the threaded rod nut bearing with the bearing facing away from the hex; Insert the threaded rod through the balancer and fastener into the crankshaft; Hold the hex end with a wrench; Use a second wrench to rotate the assembly.
Many applications: the forcing fasteners in this harmonic balancer puller fit a wide variety of V8 and V6 vehicles; M16 x 2. 0 mm gm, chrysler, M14 x 1. 5 mm dodge, and jeep, and Jeep, M12x 1.75 mm dodge chrysler, and M12 x 1. 5 mm Ford.
Save time and money: car repairs can be expensive; by using this harmonic balancer installer, you will be saving over $600; You can also save time with this balancer installation tool by not waiting for repairs at the auto shop. Effective: the three puller arms have a significant bite to grip and remove pressed-on harmonic balancers; This harmonic balancer puller kit both reduces the risk of stripping threads inside the crankshaft and the risk of breaking crank bolts.
Orion Motor Tech #ad - A. Convenient storage case: this puller set comes with a rugged blow-molded case, keeping everything organized and easy to store or transport between jobs. Quick balancer removal: this harmonic balancer puller kit by orion motor tech is specifically designed for quick removal of pressed-on balancers with a single center retainer bolt; with this engine repair tool there's no need to disassemble the radiator, saving you a huge chunk of time.
D. B. C. Safe & easy operation: this mechanic tool set includes a unique 3-jaw puller for a firm and secure grip, 5-1/5", and 4 forcing rods 3-7/8", 6-1/3", a pressure screw fitted for 24 mm drive tools that easily centers up to drive the rods, 7-3/5" to keep your work fast and efficient.
Durable construction: each part in this professional tool kit is made from structural-grade AISI 1045 medium carbon steel for superior strength with a cataphoretic electro-coating for corrosion-resistant durability and longevity.
Orion Motor Tech #ad - Wide compatibility: our harmonic damper pulley puller set works for dampers and balancers in a wide range of domestic and import vehicles, GM Generation II engines, Chevrolet trucks since 2003, 1990 Chryslers, Fords since 1995, the 1995 Mitsubishi Eclipse, including Cadillacs since 1988, and more!.
Quick balancer removal: this harmonic balancer puller kit by Orion Motor Tech is specifically designed for quick removal of pressed-on balancers with a single center retainer bolt; with this engine repair tool there's no need to disassemble the radiator, saving you a huge chunk of time.
Convenient storage case: this puller set comes with a rugged blow-molded case, keeping everything organized and easy to store or transport between jobs. Durable construction: each part in this professional tool kit is made from structural-grade AISI 1045 medium carbon steel for superior strength with a cataphoretic electro-coating for corrosion-resistant durability and longevity.
BILITOOLS #ad - Includes: 1 x 3-jaw puller, 135 mm, 1 x storage case. Clevis pins allow jaws to be quickly removed and installed. It reduces damage to both the pulley and the shaft.
Applications: this set is compatible with chrysler, compatible with GM, vans, compatible with Cadillac, SUVs, compatible with Mitsubishi, and compatible with Oldsmobile cars, and pickup trucks. This harmonic balancer puller Set provides you with everything you need to remove damper pulleys in tight engine compartments without removing the radiator.
1. Powerbuilt
#adPowerbuilt Harmonic Balancer Puller and Installer Tool Set, Install and Remove Kit, Storage Case, 648637, Cars and Light Trucks
#adTool solutions for most all situations. 4pc axle nut socket set K. Strong and dependable enough to last a lifetime. Built to exceed tool standards. Removal pieces: combo yoke, national fine center screw, center point piece and bolt pairs.
More information #ad
Adapters included: m12-1. 5, m14-1. 5, 1/2-inch-20, m16-2. 0, 7/16-inch-20, 9/16-inch-18 and 3/416. Kit 12 includes 22-piece for removal and installation of harmonic balancers with threaded holes. Kit services: many automobiles and light trucks.| Brand | Powerbuilt #ad |
| Manufacturer | Alltrade Tools #ad |
| Height | 10.25 Inches |
| Length | 2.88 Inches |
| Weight | 7.15 Pounds |
| Width | 13 Inches |
| Part Number | 648637 |
| Model | 648637 |
More information #ad
2. Powerbuilt
#adCrankshaft Pulley, 33 Piece, Storage Case, 648616, Powerbuilt Harmonic Balancer and Pulley Installer Tool Kit, Remove and Install
#adTool solutions for most all situations. Includes special puller for removal of the crankshaft pulley on many 1990 and newer Chryslers engines. Kit 45 includes 33-piece for removal and installation of harmonic balancers with threaded holes.
More information #ad
Storage case includes usage photos. Built to exceed tool standards. For use on many uS made V6 and V8 engines. Tool set for removal and installation of harmonic balancers that have threaded holes. Combo 2/3 jaw gear pull 4.| Brand | Powerbuilt #ad |
| Manufacturer | Alltrade Tools #ad |
| Height | 13.63 Inches |
| Length | 3.25 Inches |
| Weight | 10.3 Pounds |
| Width | 15.88 Inches |
| Part Number | 648616 |
| Model | 648616 |
| Warranty | Limited Factory Warranty |
More information #ad
3. ABN
#adABN Universal Harmonic Balancer Puller & Installer 52-Piece Tool Kit – Master Balancer & Pulley Removal/Installation Set
#adPractical: use the abn universal harmonic balancer puller & installer 52-Piece Tool Kit – Master Balancer & Pulley Removal/Installation Set to safely remove harmonic balancers and drive pulleys which are pressed fitted onto the crank shaft without damaging your vehicle.
More information #ad
Contents: package includes 1 puller shaft + 1 flanged nut + 1 puller plate bearing + 8 adapters + 11 washers + 10 black screw bolts + 20 silver screw bolts + 1 carrying case. Easy storage: heavy-duty 13” x 9. 5” x 2. 5” 33cm x 24. 1cm x 6. 4cm plastic blow-molded carrying case for easy transportation, simple storage, and quick organization; Each slot has an embossed size labeling for easy identification. Specifications: heavy duty 3/4" diameter forcing screw internally threaded to fit the eight adapters to install harmonic balancers; adapters m16 x 2. 0, 9/16-18, m8 x 1. 25 x 65mm, 7/16-20; black screws m10 x 1.
| Brand | ABN #ad |
| Manufacturer | ABN #ad |
| Height | 2.25 Inches |
| Length | 13 Inches |
| Weight | 8.51 Pounds |
| Width | 10 Inches |
| Part Number | 6595 |
| Model | 4333088824 |
More information #ad
4. OEMTOOLS
#adOEMTOOLS 25090 Harmonic Balancer Puller Kit, Adjustable 3-Jaw Puller Fits Most Late Model Automobiles & Trucks, 6 Piece, Forcing Screw Fits a 3/8” Square Drive, Includes 4 Forcing Rods
#adProduct specifications: includes puller body, 3 jaw retaining pins, 6-1/2", 5-13/32", 3-jaw puller, 3 Wave Washers, 4 Pressure Screw Adapter Rods 4", and 7-13/32"; Blow-Molded Carrying Case.
More information #ad
Wide application: crankshaft harmonic balancer puller designed for use with model gm 2000 Generation II Cadillac 1988 - Newer, Ford 1995 - Newer, Chevrolet Trucks 2003 - Newer, Chrysler 1990, and Mitsubishi Eclipse 1995. For pressed-on harmonic balancers: harmonic balancer tool is designed for pressed-on harmonic balancers with a single center retainer bolt; Uses 3 jaw puller arms with significant bite to grip and remove spoke-style pressed-on harmonic balancers.
| Brand | OEMTOOLS #ad |
| Manufacturer | OEMTOOLS #ad |
| Height | 2 Inches |
| Length | 9.3 Inches |
| Weight | 0.61 Pounds |
| Width | 7.2 Inches |
| Part Number | 25090 |
| Model | 25090 |
| Warranty | OEMTOOLS Limited Lifetime |
More information #ad
5. Powerbuilt
#ad648994, Balancers on Car Vehicles and Light Trucks, Remove and Install, Powerbuilt Harmonic Balancer Puller Set, Thread Adapters
#adThe right tool for the job. Storage case includes usage photos. Precision-built to meet or exceed ANSI standards. Durable storage case with step-by-step instructions.
More information #ad
Kit includes press and multiple adapters for pulling and pressing balancers. Durable storage case with step-by-step instructions. Removes and installs harmonic balancers on many automobiles and light trucks. Kit 64 includes 42-piece for removal and installation of harmonic balancers that have threaded holes.| Brand | Powerbuilt #ad |
| Manufacturer | Alltrade Tools #ad |
| Height | 13.38 Inches |
| Length | 3.25 Inches |
| Weight | 10.3 Pounds |
| Width | 15.5 Inches |
| Part Number | 648994 |
| Model | 648994 |
More information #ad
6. OEMTOOLS
#adOEMTOOLS 27306 Long-Reach Harmonic Balancer/Pulley Installer, Extra Long Forcing Screws for Hard to Reach Balancer Pulleys
#adMany applications: the forcing fasteners in this harmonic balancer puller fit a wide variety of V8 and V6 vehicles; M16 x 2. 0 mm gm, chrysler, M14 x 1. 5 mm dodge, and jeep, and Jeep, M12x 1.75 mm dodge chrysler, and M12 x 1. 5 mm Ford.
More information #ad
Convenient package: all of the pieces in this harmonic balancer installer kit come in one convenient package, making the pieces both easy to find and easy to store; Never worry about losing pieces with this harmonic balancer puller set. Save time and money: car repairs can be expensive; by using this harmonic balancer installer, you will be saving over $600; You can also save time with this balancer installation tool by not waiting for repairs at the auto shop. Effective: the three puller arms have a significant bite to grip and remove pressed-on harmonic balancers; This harmonic balancer puller kit both reduces the risk of stripping threads inside the crankshaft and the risk of breaking crank bolts.
| Brand | OEMTOOLS #ad |
| Manufacturer | OEMTOOLS #ad |
| Height | 2.7 Inches |
| Length | 10.2 Inches |
| Weight | 0.61 Pounds |
| Width | 5.2 Inches |
| Part Number | 27306 |
| Model | 27306 |
| Warranty | OEMTOOLS Limited Lifetime |
More information #ad
7. Orion Motor Tech
#ad3-Jaw Pulley Puller Set Compatible with Chevy GM Chrysler Cadillac Ford More, Red, Adjustable 3-Jaw Puller Set for Removing Harmonic Dampers & Balancers, Orion Motor Tech Harmonic Balancer Puller Kit
#adD. B. C. Safe & easy operation: this mechanic tool set includes a unique 3-jaw puller for a firm and secure grip, 5-1/5", and 4 forcing rods 3-7/8", 6-1/3", a pressure screw fitted for 24 mm drive tools that easily centers up to drive the rods, 7-3/5" to keep your work fast and efficient.
More information #ad
E. Wide compatibility: our harmonic damper pulley puller set works for dampers and balancers in a wide range of domestic and import vehicles, GM Generation II engines, Chevrolet trucks since 2003, Fords since 1995, the 1995 Mitsubishi Eclipse, 1990 Chryslers, compatible with Cadillacs since 1988, and more!. Durable construction: each part in this professional tool kit is made from structural-grade AISI 1045 medium carbon steel for superior strength with a cataphoretic electro-coating for corrosion-resistant durability and longevity.
| Brand | Orion Motor Tech #ad |
| Manufacturer | Orion Motor Tech #ad |
| Height | 3 Inches |
| Length | 11 Inches |
| Width | 9 Inches |
| Part Number | PD01-GR |
| Model | PD01-GR |
| Warranty | 1 year |
More information #ad
8. Orion Motor Tech
#ad3-Jaw Pulley Puller Set Compatible with Chevy GM Chrysler Cadillac Ford More, Adjustable 3-Jaw Puller Set for Removing Harmonic Dampers & Balancers, Orion Motor Tech Harmonic Balancer Puller Kit
#adQuick balancer removal: this harmonic balancer puller kit by Orion Motor Tech is specifically designed for quick removal of pressed-on balancers with a single center retainer bolt; with this engine repair tool there's no need to disassemble the radiator, saving you a huge chunk of time.
More information #ad
Safe & easy operation: this mechanic tool set includes a unique 3-jaw puller for a firm and secure grip, and 4 forcing rods 3-7/8", a pressure screw fitted for 24 mm drive tools that easily centers up to drive the rods, 6-1/3", 5-1/5", 7-3/5" to keep your work fast and efficient. Convenient storage case: this puller set comes with a rugged blow-molded case, keeping everything organized and easy to store or transport between jobs. Durable construction: each part in this professional tool kit is made from structural-grade AISI 1045 medium carbon steel for superior strength with a cataphoretic electro-coating for corrosion-resistant durability and longevity.
| Brand | Orion Motor Tech #ad |
| Manufacturer | Orion Motor Tech #ad |
| Height | 3 Inches |
| Length | 11 Inches |
| Weight | 4 Pounds |
| Width | 9 Inches |
| Part Number | PD01-00 |
| Model | PD0100 |
| Warranty | 1 year warranty |
More information #ad
9. BILITOOLS
#adBILITOOLS Harmonic Balancer Puller Set, Adjustable 3-Jaw Puller for Removing Harmonic Damper Pulley Compatible with Chevy GM Chrysler ect.
#adApplications: this set is compatible with chrysler, compatible with GM, vans, compatible with Cadillac, SUVs, compatible with Mitsubishi, and compatible with Oldsmobile cars, and pickup trucks. This harmonic balancer puller Set provides you with everything you need to remove damper pulleys in tight engine compartments without removing the radiator.
More information #ad
Designed to ease the operation of pulling the balancer pulley. Dimension: 3/8" drive forcing screw-90 mm; 4 x forcing rods-100 mm, 4 x Forcing rods, 2 x forcing screws, 165 mm, 185 mm. Manufacture by high quality 45# steel provides extra strength and longevity with a black oxide finish for corrosion resistance.| Brand | BILITOOLS #ad |
| Manufacturer | BILITOOLS #ad |
| Part Number | B1E91387 |
More information #ad
