Top 9 dual exhaust Kit Ford F150 – Powersports Silencers & Mufflers

As an Amazon Associate I earn from qualifying purchases.

1. Truck Exhaust Kits

#ad

Shop Line dual exhaust system 2.5 AL pipe 2 chamber Muffler 2.5" Chrome Slash Cut Weld on Tip, Truck Exhaust Kits

#ad
Truck Exhaust Kits #ad - The flowsound muffler is a moderately aggressive 2 chamber muffler. Aluminized mandrel bent for longer life. Rear exit Tail Pipes. It will give that deep throaty tone and mind blowing performance normally found in more expensive brand name mufflers.

2. 5" slash cut weld on 18" Chrome Tips x2. This product is in compliance with the Clean Air Act in full. This is a great choice for the budget minded enthusiast that is looking for great sound and performance at a great price. The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle. Disclaimer* this product does not interfere with any portion of the vehicle’s emissions control systems.
BrandTruck Exhaust Kits #ad
ManufacturerTruck Exhaust Kits #ad
Height9 Inches
Length48 Inches
Weight65 Pounds
Width20 Inches
Part NumberM25FF9804FS2SW18RE0

2. Truck Exhaust Kits

#ad

Shop Line dual exhaust system 2.5 AL pipe 1 chamber muffler, Truck Exhaust Kits

#ad
Truck Exhaust Kits #ad - Rear exit Tail Pipes. Disclaimer* this product does not interfere with any portion of the vehicle’s emissions control systems. Aluminized mandrel bent for longer life.

This product is in compliance with the Clean Air Act in full. The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle. This is a great choice for the budget minded enthusiast that is looking for great sound and performance at a great price. It will give that deep throaty tone and mind blowing performance normally found in more expensive brand name mufflers. The flowsound muffler is a moderately aggressive 1 chamber muffler.
BrandTruck Exhaust Kits #ad
ManufacturerTruck Exhaust Kits #ad
Height9 Inches
Length48 Inches
Width20 Inches
Part NumberM25FF9804FS1NT00RE0

3. Truck Exhaust Kits

#ad

Shop Line dual exhaust system 2.5 AL pipe Flowmaster Super 44 2.5" Chrome Slash Cut Weld on Tip, Truck Exhaust Kits

#ad
Truck Exhaust Kits #ad - Disclaimer* this product does not interfere with any portion of the vehicle’s emissions control systems. The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle. Aluminized mandrel bent for longer life. Rear exit Tail Pipes. Flowmaster super 44 mufflers offer distinct advantages over original 40 Series mufflers, while using the same technology as the Super 40 mufflers. This product is in compliance with the Clean Air Act in full. 2. 5" slash cut weld on 18" Chrome Tips x2.
BrandTruck Exhaust Kits #ad
ManufacturerTruck Exhaust Kits #ad
Height9 Inches
Length48 Inches
Weight65 Pounds
Width20 Inches
Part NumberM25FF9804F44SW18RE0

4. Truck Exhaust Kits

#ad

Truck Exhaust Kits, Shop Line dual exhaust system 2.5" Aluminized pipe 1 Chamber Muffler 2.5" With Slash Cut Chrome Tips for Silverado, F-Series,& Ram, Sierra

#ad
Truck Exhaust Kits #ad - The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle. This product is in compliance with the Clean Air Act in full. Disclaimer* this product does not interfere with any portion of the vehicle’s emissions control systems.
BrandTruck Exhaust Kits #ad
ManufacturerTruck Exhaust Kits #ad
Height9 Inches
Length48 Inches
Width20 Inches
Part NumberAM25GF0713FS1SW18RE0

5. Truck Exhaust Kits

#ad

Truck Exhaust Kits, Shop Line dual exhaust system 2.5 AL pipe Flowmaster 40 2.5" Polished Rolled Edge Clamp on Tip

#ad
Truck Exhaust Kits #ad - Aluminized mandrel bent for longer life. Rear exit Tail Pipes. Disclaimer* this product does not interfere with any portion of the vehicle’s emissions control systems. This product is in compliance with the Clean Air Act in full. 2. 5" rolled edge clamp on 18" polished Tip x2. Looking for the origional Flowmaster sound? Then take a look at these 40 series Flowmaster mufflers. The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle.
BrandTruck Exhaust Kits #ad
ManufacturerTruck Exhaust Kits #ad
Height9 Inches
Length48 Inches
Weight65 Pounds
Width20 Inches
Part NumberM25FF9804F40TKRCRE0

6. Magnum Exhaust

#ad

Flowmaster Super 44 Mandrel-Bent Aluminized Dual Truck Exhaust Kit w/Chrome Tips for Silverado, Sierra, F-Series & Ram

#ad
Magnum Exhaust #ad - Single 3" inlet /dual 2. 5" outlet flowmaster Super 44 Muffler. Two 3. 5"x18" weld-on angle-cut chrome tips. Two 2. 5" high-flow mandrel-bent tailpipes, cut and swedged. Performance dual exhaust for Ram, Ford F-Series, Silverado & Sierra trucks. Multi-depth insulated hangers & muffler clamps.
BrandMagnum Exhaust #ad
ManufacturerMagnum Exhaust #ad
Height50 Centimeters
Length100 Centimeters
Weight100 Kilograms
Width100 Centimeters
Part NumberDK107-CH

7. Magnum Exhaust

#ad

Glasspack Mandrel-Bent Dual Truck Exhaust Kit with Chrome Tips

#ad
Magnum Exhaust #ad - Multi-depth insulated hangers & muffler clamps. Two 2. 5" mandrel-bent tailpipes, cut and swedged. Single 3" inlet/dual 2. 5" outlet Glasspack Muffler. Two 3. 5"x18" weld-on angle-cut chrome tips.
BrandMagnum Exhaust #ad
ManufacturerMagnum Exhaust #ad
Part NumberDK111-CH

8. Truck Exhaust Kits

#ad

Truck Exhaust Kits, Shop Line dual exhaust system 2.5 AL pipe 2 chamber Muffler

#ad
Truck Exhaust Kits #ad - This product is in compliance with the Clean Air Act in full. This is a great choice for the budget minded enthusiast that is looking for great sound and performance at a great price.

Disclaimer* this product does not interfere with any portion of the vehicle’s emissions control systems. It will give that deep throaty tone and mind blowing performance normally found in more expensive brand name mufflers. Rear exit Tail Pipes. Aluminized mandrel bent for longer life. The flowsound muffler is a moderately aggressive 2 chamber muffler. The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle.
BrandTruck Exhaust Kits #ad
ManufacturerTruck Exhaust Kits #ad
Height9 Inches
Length48 Inches
Weight65 Pounds
Width20 Inches
Part NumberM25FF9597FS2NT00RE0

9. Truck Exhaust Kits

#ad

Truck Exhaust Kits, Shop Line dual exhaust system 2.5 AL pipe Flowmaster 40 2.5" Black Slash Cut Weld on Tip Corner exit

#ad
Truck Exhaust Kits #ad - Corner Exit Adapters. Looking for the origional Flowmaster sound? Then take a look at these 40 series Flowmaster mufflers. 2. 5" slash cut weld on 18" Black Tips x2. The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle. Disclaimer* this product does not interfere with any portion of the vehicle’s emissions control systems. This product is in compliance with the Clean Air Act in full. Aluminized mandrel bent for longer life.
BrandTruck Exhaust Kits #ad
ManufacturerTruck Exhaust Kits #ad
Height9 Inches
Length48 Inches
Width20 Inches
Part NumberM25FF9804F40BW18455