Top 9 1/4 NPT Air Fitting – Automotive Replacement Fuel System Fittings

As an Amazon Associate I earn from qualifying purchases.

1. EDGE INDUSTRIAL

#ad

EDGE INDUSTRIAL Brass REDUCING HEX Bushing 3/4" Male NPT X 1/4" Female NPT Fuel / AIR/ Water / Oil/ Gas WOG Qty 01

#adEDGE INDUSTRIAL #ad - 3/4" male npt x 1/4" female nPT Reducing Hex Bushing. Not deemed lead free. Backed by edgE Industrial full manufacturers warranty. 1000 psi working pressure, temperature range of -65°F to 250°F -53°C to 121°C. Please note, 3/4" npt measures 1. 050", 1/4" npt measures 0540" outside thread diameter in linear inches. Not for potable water.

Brand	EDGE INDUSTRIAL #ad
Manufacturer	EDGE INDUSTRIAL #ad
Weight	0.09 Pounds
Part Number	E.I. NPT 109

2. VIAIR

#ad

Viair 92951 1/8" Male NPT to 1/4" Compression Fitting for 1/4" Air Line

#adVIAIR #ad - Teflon tape is not recommended. 1/8 inch male to 1/4 ID Air hose compression fitting. Pneumatic fitting used to connect an air line to your onboard air system. Fitting made from Brass. Use thread sealant for proper installation. Npt fittings are thicker at the base and should not be overtightened.

Brand	VIAIR #ad
Manufacturer	Viair #ad
Height	5.5 Inches
Length	6 Inches
Weight	0.02 Pounds
Width	6 Inches
Part Number	92951
Model	92951

3. Vixen Air

#ad

Vixen Air 1/2" NPT Male to Push to Connect PTC for 1/4" OD Hose Swivel Elbow 2-Pack VXA2124-2

#adVixen Air #ad - Pressure rating: 250 PSI. Zinc plated Durable Brass Material. Swivel. For ¼ inch OD Hose. Thread size: ½ inch NPT Male.

Brand	Vixen Air #ad
Manufacturer	Vixen Air #ad
Part Number	VXA21242
Model	VXA21242

4. ALKON

#ad

ALKON D.O.T. 90 Degree Elbow Swivel Air Brake Fitting 3/8 Tube X 1/4 NPT AQ69-DOTS-6X4 Made in USA

#adALKON #ad - Alkon d. O. T. Push-in fittings provide up to 60% more flow than conventional fittings with internal supports and saves up to 75% in assembly time.

Meets d. O. T. Fmvss 571. 106 air brake performance, requirments sae j1131, j2494-1 & j2494-3 air brake performance requirements. Swivels elbow threaded fittings that allow close center line instalation eliminating orientation problems. Thread sealant on all male threads pre applied with LOCTITE BRAND 520 Positive seal-tube support area beyond “o” ring exceeds that of all competitive products, compensates for bias cut tubing and dramatically reduces trouble shooting time.

Brand	ALKON #ad
Manufacturer	ALKON #ad
Part Number	AQ69-DOTS-6x4

5. VIAIR

#ad

Viair 92837 1/4" Male NPT to 1/4" Compression Fitting for 1/4" Air Line

#adVIAIR #ad - Air tank should be used with a drain cock and pressure release valve. Please note: use thread sealant for proper installation. Teflon tape is not recommended. One year manufacturer's defect warranty through manufacturer with receipt. For 1/4 airlines. 1/4 male, npt nickel plated to 1/4 compression fitting. Used to connect an air line to your onboard air system.

Brand	VIAIR #ad
Manufacturer	Viair #ad
Height	5.5 Inches
Length	6 Inches
Weight	0.02 Pounds
Width	6 Inches
Part Number	92837
Model	92837

6. Milton

#ad

Milton 527 12" x 1/4" NPT Fitting Bayonet Inflator Gauge Hose Whip Replacement – Dual truck Tire Chuck Head

#adMilton #ad - This hose whip should not be connecting to an air hose directly. Air chuck threads: 1/8”-27 NPT. Replacement air chuck: Milton #500-4. Pressure range of psi 10-120 and kPa 80-840 Replacement hose whip for milton bayonet inflator gauge only. All milton replacement hose whips have 1/4” NPT threads and are interchangeable with any Milton bayonet gauge. Do not hard connect to air hose. Replacement hose whip for Milton bayonet inflator gauge #522/S-522.

Brand	Milton #ad
Manufacturer	Milton Industries #ad
Height	0 Inches
Length	0 Inches
Weight	0.49 Pounds
Width	0 Inches
Part Number	527
Model	527

7. YOTOO

#ad

Large 3" Easy Read Glow Dial, Flexible Rubber Hose and 1/4" NPT Air Fitting, 150 PSI Heavy Duty Swivel Air Chuck, YOTOO Tire Inflator with Gauge

#adYOTOO #ad - Easy to use: connect this tire inflator to air supplyair compressor, Clip the air chuck to valve stem to test tire pressure, Press the triger to inflate, It features built-in air bleeder valve to quickly decrease pressure in overinflated tires and reset readings to zero.

Warranty&support: one Year Warranty. Durability & multipurpose tire inflator with gauge: the durability aluminium alloy body is for long life use. The large 3" dial and the unique glow-in-the-dark dial display for easy to use in dark shops, garages. This widely range of 150psi and 10 bar makes it can be widely applied to car, dual tire truck, bicycle, motorcyle, suv, etc.

High accuracy & large 3" unique glow-in-the-dark: professionally tested & calibrated highly accurate to ±2. 5%. Any problem, please feel free to contact us. Perfectly work with different stem clamps: Straight lock-on brass air chuck offers great seal on tire valve outside car tire and frees up your hands to operate the tire pump.

Brand	YOTOO #ad
Manufacturer	Hangzhou Yotoo Import and Export Co.,Ltd #ad
Part Number	ADFAF
Model	101002k

8. VIAIR

#ad

Viair 92838 1/8" Female NPT to 1/4" Compression Fitting for 1/4" Air Line

#adVIAIR #ad - Teflon tape is not recommended. For 1/4 airlines. 1/8 male, npt nickel plated to 1/4 compression fitting for connecting air lines to air systems. Please note: use thread sealant for proper installation. One year manufacturer's defect warranty through manufacturer with receipt. Use on onboard air systems or air suspension systems.

Brand	VIAIR #ad
Manufacturer	Viair #ad
Height	5.5 Inches
Length	6 Inches
Weight	0.02 Pounds
Width	6 Inches
Part Number	92838
Model	92838

9. Vixen Horns

#ad

Vixen Horns 3/8" OD Nylon Plastic Hose 10 Feet w/ 1/4" NPT and 1/8" NPT Brass Compression Fitting for Train/Air Horn Systems/Suspension VXK8101

#adVixen Horns #ad - Length: 10 Feet. And 1/8 npt compression Fittings Included. Outer diameter OD: 3/8 inch. Inner diameter ID: ¼ inch. Working pressure: 225PSI.

Brand	Vixen Horns #ad
Manufacturer	Vixen Horns #ad
Part Number	VXK8101