Top 8 Trailing Arm Bushing Remover – Automotive Replacement Control Arm Bushing Kits

As an Amazon Associate I earn from qualifying purchases.

1. 8MILELAKE

#ad

8MILELAKE Rear Trailing Arm Bushing Remover and Installer Tool Compatible for Honda Civic

#ad
8MILELAKE #ad - Service completely performed on the car. Shifting hook design could adjust the size. Included in a blow molded case. Service time is only 10 minutes per side, you can save more time, labor and money. No removing the trailing arm from the vehicle and using a hydraulic press.
Brand8MILELAKE #ad
Manufacturerfreebirdtrading #ad
Part NumberD00833

2. ABN

#ad

ABN Rear Trailing Arm Bushing Tool – Trailing Arm Bushing Remover & Installer – Bushing Press Kit for Honda & Acura

#ad
ABN #ad - Easy storage: heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization. Easy to use: remove wheels and body lateral link bolts watch for any camber shims between the body and the link, lubricate, install new trailing arm bush, loosen not remove the toe link bolts, remove the trailing arm bush bolts, use tool to push out the trailing arm bush, pull the trailing arm down enough to put on tool you may need to disconnect brake line bracket/parking brake bracket on trailing arm, apply lubrication to trailing arm bush, clean, reassemble; 14mm socket not included.

Simple & safe design: hook design for mounting the tool on the trailing arm securely without damaging the ABS sensor cable, and parts close to the bush with a hydraulic press or disconnect brake parts such as calipers, rotors, brake fluid lines, trailing arm, brake shoes, or emergency brake cables.

Replace car bushes: use the abn trailing arm bushing removal Tool for replacement of the rear trailing arm bush moveable metal suspension pieces on the rear of your car that the wheel, brake, and hub connect to on your Honda or Acura vehicle. Fits your vehicle: for honda or acura vehicles with trailing arm bushings; applicable for honda – civic 1988-2000, Del Sol 1993-1997 and Acura – Integra 1994-2001, CRX 1988-1991, CRV 1997-2001, Integra 1990-1993.
BrandABN #ad
ManufacturerABN #ad
Height4.25 Inches
Length14.8 Inches
Weight6.15 Pounds
Width11.2 Inches
Part Number9886

3. MOSTPLUS

#ad

MOSTPLUS Rear Trailing Arm Bushing Remover Installer Tool Bushing Press Set Compatible with Honda Acura

#ad
MOSTPLUS #ad - Important note - do not remove the trailing arm from vehicles or use a hydraulic press. Design - shifting hook design can adjust the size.

Function - be used for replace the rear trailing arm bush, then Removal and installation of the new bush to rear trailing arm without damage to the ABS sensor cable. Application - compatible with honda civic 1988-2000; compatible with crv 1997-2001; compatible with crx 1988-1991; Compatible with Del Sol 1993-1997; Compatible with Acura Integra 1994-2001; Compatible with Integra 1990-1993. Packing - included in a Heavy-duty plastic blow-molded carrying case for easy and safe transportation.
BrandMOSTPLUS #ad
ManufacturerMOSTPLUS #ad
Part Number221028
WarrantyOne Year Warranty

4. BTSHUB

#ad

BTSHUB Rear Trailing Arm Bushing Remover and Installer Tool, Bushing Press Kit Copatible for Honda & Acura

#ad
BTSHUB #ad - Unique design: hook design for mounting the tool on the trailing arm securely without damaging the ABS sensor cable, rotors, brake fluid lines, brake shoes, and parts close to the bush with a hydraulic press or disconnect brake parts such as calipers, trailing arm, or emergency brake cables. Application: for honda or acura vehicles with trailing arm bushings; suitable for honda – civic 1988-2000, CRX 1988-1991, Del Sol 1993-1997 and Acura – Integra 1994-2001, crv 1997-2001, Integra 1990-1993.

How to use: remove wheels and body lateral link bolts watch for any camber shims between the body and the link, clean, remove the trailing arm bush bolts, use tool to push out the trailing arm bush, pull the trailing arm down enough to put on the tool you may need to disconnect brake line bracket/parking brake bracket on trailing arm, install new trailing arm bush, apply lubrication to trailing arm bush, lubricate, loosen not remove the toe link bolts, reassemble.

Function: the rear trailing arm bushing remover tool is used for replacement of the rear trailing arm bush moveable metal suspension pieces on the rear of your car that the wheel, brake, and hub connect to on your vehicle; Removal and installation of the new bush to Rear Trailing arm without damage to the ABS sensor cable. Easy storage: comes with a premium well-organized box for easy storage and transport. The tool is stored safely in a beautifully packaged case that can withstand high-strength extrusion.
BrandBTSHUB #ad
ManufacturerRuichen #ad
Height3.94 Inches
Length7.87 Inches
Width3.15 Inches
Part NumberBT0115

5. Qiilu

#ad

Qiilu Rear Suspension Trailing Arm New Bushing Removal Tool Fit for Ford Focus

#ad
Qiilu #ad - Constructed with premium material, rigid, rust-resistant and durable. Especially designed for Ford Focus. Professional manufacturing, high quality and good reliability. Used to press in and out of the rear of the shaft without sound. Used to press in and out of the rear of the shaft without sound. Saves a lot of time by eliminating the need to disassemble the rear axle.
BrandQiilu #ad
ManufacturerQiilu #ad
Part NumberSSTT-0116

6. Orion Motor Tech

#ad

For Most 2WD and 4WD Cars and Light Trucks, Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters

#ad
Orion Motor Tech #ad - Professional grade quality and durability - off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Universally compatible with a wide range of vehicles - fit most american domestic and imported 2-wheel drive 2wd and 4-wheel drive 4WD cars and light pickup trucks that have press-fit type ball joints, GM, Dodge, include 4-wheel drive 4WD adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle found on Ford, IHC and Jeep vehicles.

Orion motor tech - we pursue outstanding quality and professional technical support. Conveniently organized in custom molded case - ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11” x 3” x 15” inch 27. 9cm x 7. 6cm x 38. 1cm plastic blow-molded carrying case with handle for easy storage, 1x Screw, 1x Removal Adapter, safe storage, 1x Installation Adapter, and quick organization. If you are not satisfied with this product or if you have any question, please feel free to let us know.

Essential tool for ball joint service - use the orion motor tech ball joint press set ball joint tool / bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, brake anchor pins, U-joints, and more on most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles without removing the control arm from the vehicle. Package include: 3x receiving tube, 1x install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Height3.54 Inches
Length13.98 Inches
Width11.91 Inches
Part NumberOMTCA BJS-0401-00
Model8542035336
Warranty2 Years Warranty, Free Replace or Full Refund

7. NewYall

#ad

NewYall Pack of 2 Rear Left & Right Trailing Arm Bushing Lower Bushings

#ad
NewYall #ad - For honda civic 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 . For honda cr-v 1997 1998 1999 2000 2001. For acura integra 1994 1995 1996 1997 1998 1999 2000 2001. For honda crx 1988 1989 1990 1991. For honda del-sol 1993 1994 1995 1996 1997.
BrandNewYall #ad
ManufacturerNewYall #ad
Part Number52385-SR3-000

8. Keenso

#ad

2pcs OEM Car Trailing Arm Bushings Machter Rear Lower Trailing Arm Bushing Pair Set for CR-V CRX Del-Sol 52385-SR3-000

#ad
Keenso #ad - Made by professional manufacture, quality meet or exceeded strict OEM requirement. High quality iron materials this trailing arm bushings is made of high grade iron material, ensure maximum strength and durability for long lasting usage.

Such a practical tool you will need it. Easy to install this trailing arm bushings comes with bracket, direct bolt-in installation, no modification is required. This is a perfect choice if you are in need of trailing arm bushings! Professional manufacturing 100% Brand new trailing arm bushings. A direct replacement part for the old one. Fitment the trailing arm bushings is especially designed for Civic CR-V CRX Del-Sol. Reliability this trailing arm bushings with stable characteristics, high reliability. Helps to improve traction and reduces wheel hop.
BrandKeenso #ad
ManufacturerKeenso #ad
Height3.94 Inches
Length6.69 Inches
Weight2.2 Pounds
Width4.72 Inches
Part NumberKeenso9zkw3yb1ed