As an Amazon Associate I earn from qualifying purchases.
1. Gates #ad
Gates 27348 Barricade Fuel Injection Hose-15' Length, Inner Diameter 5/16" #adGates #ad
- Multi-fuel compatibility. Hnbr tube with thermoplastic barrier, aramid fiber reinforcement and CPE cover. Oil, heat, ozone, and abrasion-resistant cover. Extremely low permeation rate. Meets sae 30r14 t2 except for kink resistance, CARB and EPA non-road fuel lines.
|Warranty||Please contact retailer/seller for assistance|
2. Continental #ad
SAE 30R9, 1.5' Length, Continental GOO65149 65149 5/16" ID Fuel Injection Hose, Max 100 psi #adContinental #ad
- Precision engineered and tested. Ensures maximum performance. Can be used with gasoline, diesel fuel, biodiesel B5, B10, ethanol, extended gasoline, oxidized sour gas, B20 and lubrication oil. Features high heat resistance.
Temperature range: -29°f to 275°f -34°c to 135°c intermittent use at 302°F 150°C. Highly durable. Inner diameter id: 5/16". 3125" | outer diameter OD:. 56". Working pressure: max 100 psi | Burst Pressure: 900 psi. 1. 5 feet of fuel injection hose designed specifically for auto and truck fuel injection systems. Maintains full flow.
3. Byredio #ad
NBR Transmission Cooler High-Pressure Injection Hose For Gas, Diesel, Engine Oil, Biodiesel Fuel, Hydraulic 10 Feet 8mm ID, 5/16 Fuel Line #adByredio #ad
- The 5/16 fuel injection hose thrive across the temperature range of -95°F to 257°F. Steel, aluminum, or plastic lines will not bend as easily as this tube. High-quality material - the 5/16 fuel line is made of 3-layers.
High psi rating - the 5/16 fuel line has a pressure rating of 300 psi working pressure, and holds up to a max of 1200 PSI. Flexibility - the highlight of this 5/16 transmission cooler hose is its sublime pliability.
The superior bending ability of this fuel tube makes it easier to install. Cut the size as you want - the 5/16 fuel line is 10 feet / 3 m, can be cut to size for all your applications.
The length of the transmission hose makes it suitable for cross-platform use in engines. The inner and the outer pipe are made of NBR rubber and the middle reinforcing layer is braided with polyester woven. Oil resistant, cold-resistant, and ethanol tolerance. Aslo fit e85. Wall thickness is 3. 25mm. You can use it on both larger and smaller engines. It also results in more fluidity in transmission.
4. EVIL ENERGY #ad
EVIL ENERGY 5/16 Fuel Hose Line NBR Rubber 30R7 10FT #adEVIL ENERGY #ad
- Applicable medium: 5/16 id fuel line can work with diesel/biodiesel/gasoline/Oil/grease/water and air, etc. Evil energy provide 10ft 5/16inch fuel hose 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message.
Application: sae 30r7 rubber fuel line widely used in fuel system, oil cooling, PCV system, steam emission, please check the pressure of application before perchase. Id: 5/16inch 8mm, od: 9/16inch（14mm. Material: NBR. Working pressure: 290psi. Burst pressure: 1160psi. Minimum Bend Radius: 3. 14inch80mm. Temperature range: -40°F to 257°F.
5. Goodies Speed #ad
Corrugated Fuel Hose 5/16" ID x 17-3/4" Long with Stainless Steel Vapor Clamps for In-Tank Use #adGoodies Speed #ad
- 8mm id x 450mm. Pa12 nylon corrugated fuel hose, 5/16" inside diameter, 17-3/4" long. Pa12 is rated for continuous immersion in fuels: gasoline, E85, diesel, etc. About an inch longer than ATL CFD-403.
Slightly tighter fit on Walbro 400 and Walbro 450 . Two stainless steel "nut and bolt" fuel-injection style clamps included. Fits outlet barb on common high-performance electric pumps like Walbro 255 and Aeromotive 340 .
6. Continental #ad
SAE 30R7, 25' Length, 50 psi, Continental 65127 5/16" ID Fuel Hose #adContinental #ad
- Maintains full flow. 25 feet of multipurpose fuel hose that can be used as a fuel line, PCV connection, emission control line or fuel return line. Can be used with unleaded gasoline, gasoline blends of ethanol E-10, diesel fuel, E-85 and sour gas.
Features high heat resistance. Working pressure: 50 psi | Burst Pressure: 250 psi. Ensures maximum performance. Temperature range: -40°f to 257°f -40°C to 125°C. Highly durable. Precision engineered and tested. Inner diameter id: 5/16". 3125" | outer diameter OD:. 56".
7. XtremeAmazing #ad
XtremeAmazing Replacement for 5/16" Fuel Injection Hose Clamps Pack of 10 1/2", 9/16" Dia #adXtremeAmazing #ad
- Designed for use on 5/16" ID Fuel Injection Hose. 10 pcs of fuel Injection Hose Clamps. 1/2" to 9/16" Diameter.
8. Glarks #ad
Glarks 84Pcs 10 Size Mini Fuel Injection Style Hose Clamp Assortment Kit For Diesel Petrol Pipe #adGlarks #ad
- Product material: Zinc plated steel, strong and durable clamps. Edge polished smooth, Avoid damage to the hose, excellent for sealing hoses against loss of liquid. Product type: High precision mini fuel injection style hose clamp.
Package include: 10 size 84pcs total in a clear box, including most commonly used size, easy to store. 5. 1. 2. Features: with hexagonal screws, you can use screwdriver to adjust the size according to demand, easy to install. 4. 3.