Top 5 Crane Cams 11977-1 – Automotive Replacement Engine Camshafts

As an Amazon Associate I earn from qualifying purchases.

1. Comp Cams

#ad

Camshaft Only, Comp Cams 54-700-11 Stage 1 Thumpr Cam for GEN III LS 4.8/5.3/6.0L Trucks

#ad
Comp Cams #ad - Developed and tested on the dyne - Adds 68 Horsepower when used with properly matched CK and MK kit components. High rpm potential - lst camshafts ace in the 6, allowing engines not only to turn more RPM, 700 to 7, 300 RPM range, but also to make more power in this range. Fit type: Vehicle Specific. Nsr" no springs Required lobe design. No guesswork - properly matched components in CK and MK kits completely remove any guesswork in selecting the rest of the valve train.
BrandComp Cams #ad
ManufacturerCOMP Cams #ad
Height2.6 Inches
Length23.31 Inches
Width2.91 Inches
Part Number54-700-11
Model54-700-11
Warranty1 Year Limited

2. Crane Cams

#ad

Crane Cams 708501 Camshaft

#ad
Crane Cams #ad - 1600-5600rpm operating Range. Good low end and mid range torque, computer upgrades required, mild supercharged, daily usage, performance and towing, good idle, 2200-3000 cruise RPM, off road, 8.5 to 9. 75 compression ratio advised. 110 lobe separation angle. Made in USA. 208/216 duration at. 050". Bolt-in performance for your truck - designed by crane Engineers to provide a bolt-in upgrade for heavy trucks and SUV's, the Crane Tuckman cam series delivers low-RPM torque while requiring little to not modifications. Fits chrysler/dodge 5. 2/5. 9l magnum. 0467"/0482" valve Lift.
BrandCrane Cams #ad
ManufacturerCrane Cams #ad
Height2.5 Inches
Length25 Inches
Width2.5 Inches
Part Number708501
Model708501
Warranty1 Year Limited

3. Crane Cams

#ad

Crane Cams 11750-16 3/8" Gold Race Rocker Arm for Chevrolet V8

#ad
Crane Cams #ad - Multi-axis cNC machining done in one operation. Fit type: Vehicle Specific. Burnished bearing surface for improved service life. Aluminum alloy holds strength at elevated temperatures.
BrandCrane Cams #ad
ManufacturerCrane Cams #ad
Height3.7 Inches
Length7.5 Inches
Width9.7 Inches
Part Number11750-16
Model11750-16

4. Comp Cams

#ad

Comp Cams 54-448-11 XFI XE-R 238/240 Hydraulic Roller Cam for GM LS GEN III/IV, camshaft only

#ad
Comp Cams #ad - Fit type: Vehicle Specific. 112 degree Lobe Separation Angle. Xtreme energy xe-r design for large cubic inch LS6 and LS1. 238/240 duration at. 050". 1, 800-6, 800 rpm operating Range. 0605"/0609" valve Lift. Aggressive and stable - quicker off the seat than original Xtreme Energy series, yet stable when used with a rigid valvetrain and performance valve springs.
BrandComp Cams #ad
ManufacturerCOMP Cams #ad
Height2.59 Inches
Length23.38 Inches
Weight10 Pounds
Width2.91 Inches
Part Number54-448-11
Model54-448-11

5. Crane Cams

#ad

Crane Cams 99726-2 Adjustable Checking Pushrod, Set of 2

#ad
Crane Cams #ad - Manufactured from steel. Should not to be run in the engine. Pushrods are adjustable with over 1. 000" travel. Facilitates in arriving at correct pushrod length. Pushrods are not to be run in your engine.
BrandCrane Cams #ad
ManufacturerCrane Cams #ad
Height1 Inches
Length17 Inches
Width5 Inches
Part Number99726-2
Model99726-2