Top 5 Adhesion Primer Quart – Automotive Primers

As an Amazon Associate I earn from qualifying purchases.

1. TRANSTAR

#ad

Quart, TRANSTAR INDUSTRIES OTC TRE-1084 Adhesion Primer, Gray

#ad
TRANSTAR #ad - Quick dry time allows for fast application of topcoat color. Ready to use - 1 coat coverage. Eliminates the need for prep paste and scuff pads. Significant cost savings - Save up to 2 hr of labor time when prepping parts. Reduces damage to new bumpers caused by abrading of plastic substrates.
BrandTRANSTAR #ad
ManufacturerTranstar Autobody Technology #ad
Height4.3 Inches
Length5 Inches
Weight4.26 pounds
Width4.3 Inches
Part Number1084

2. RAPTOR

#ad

RAPTOR Etch Primer 1K Aerosol UP5023 13.2 Oz, Gray

#ad
RAPTOR #ad - Flat fan high atomization nozzle offers a large fan pattern and excellent coverage. Prep and upgrade your RAPTOR application. Etch and prime bare metal in one step. Can be directly topcoated - no sanding required. Creates an anti-corrosive barrier that prevents steel from rusting.
BrandRAPTOR #ad
ManufacturerU-POL Ltd #ad
Part NumberUP5023
ModelUP5023

3. 3M

#ad

3M Primer 94 1/2 Pint | Car Wrapping Application Tool

#ad
3M #ad - Allow primer to dry before second application. Use on plastic, painted, rubber, and even bare metal. Promotes the adhesion of 3M tapes. Bonding surface should be clean and dry.
Brand3M #ad
Manufacturer3M #ad
Height3 Inches
Length2.9 Inches
Width2.9 Inches
Part Number23926
Model23926

4. POR-15

#ad

POR-15 High Build Primer, Sandable Bonding Coat | Fills in Minor Imperfections | Single Component Formula, 1 qt., Packing May Vary

#ad
POR-15 #ad - Spray or brush on one or two covering coats of POR-15 High Build Primer and allow 10 to 15 minutes between coats. Known for the unbeatable 3-step stop rust system, quality control, POR-15 is trusted by DIY & Professionals. Por-15 high build primer - provides sandable and buildable coating that can be applied over cured POR-15 Rust Preventive Coating and all POR-15 topcoats to enable quick refinishing and recoating of these products.

Clean painted and bare metal surfaces with POR-15 Cleaner Degreaser. Try some on your next project! It sands very smoothly, like lacquers, enamels, as well. Application - for maximum adhesion sand surfaces to be painted with 320 grit sandpaper. Por-15 high build primer can be topcoated after 24 hours of cure. Interlocking primer - formulated with special adhesion characteristics that make por-15 high build Primer perfect for most painted surfaces especially POR-15 Rust Preventive Coating.

Our high build primer provides sandable and buildable coating that can be applied over cured POR-15 Rust Preventive Coating and all POR-15 topcoats to enable quick refinishing and recoating of these products. Single component formula that fills in minor Imperfections and adheres well to steel, stainless steel, brass, aluminum, and other primed and painted surfaces. Our satisfaction commitment – at por-15 we strive to bring the ultimate in rust prevention. We are committed to innovation, and excellent customer service.
BrandPOR-15 #ad
ManufacturerPOR-15 #ad
Height1.97 Inches
Length1.67 Inches
Weight2.63 pounds
Width1.67 Inches
Part Number41104
Model41104
WarrantyLIMITED WARRANTY

5. Dupli-Color

#ad

11 oz., Dupli-Color CP199 Clear Adhesion Promoter Primer

#ad
Dupli-Color #ad - Improve adhesion of all paints. Ideal for automotive plastics. Quick drying clear primer. Ideal of interior or exterior use.
BrandDupli-Color #ad
ManufacturerDuplicolor #ad
Height8.2 Inches
Length2.61 Inches
Weight0.94 Pounds
Width2.61 Inches
Part NumberCP199
ModelCP199
WarrantyCustomer satisfaction guaranteed