Top 10 Valve Spring Compressor Kit – Suspension Tools

As an Amazon Associate I earn from qualifying purchases.

1. Orion Motor Tech

#ad

And Small Engine Repairs, and Lever for Car, ATV, Motorcycle, Extension Rods, Collet Pusher Adapters, Orion Motor Tech Valve Spring Compressor | 10 Piece Spring Clamp Tool Kit with C Clamp

#ad
Orion Motor Tech #ad - 10-piece valve spring set: this clamp set by orion motor tech includes a wide C clamp, 5 collet adapters 16 19 23 25 & 30mm, 3 extension rods 3" 4. 4" & 4. 4", and a 4-inch hand lever. Safe & simple operation: instructions guide simple use, selecting the best sizes for compressing the valve springs or dealing with cylinder heads safely during removal and installation from almost any automotive, motorcycle, or other small engine.

Easy storage & transport: the reinforced blow-molded case keeps everything organized, easy to carry, and just as convenient to stow away between jobs. Satisfaction guaranteed: order knowing that Orion Motor Tech's usual strong warranty and friendly 24/7 customer service ensures these automotive tools and equipment will give you years of helpful service.

Solid durable construction: our c clamp and other parts are forged from carbon steel, heat treated and coated with black oxide to provide superior strength and corrosion resistance and withstand the stress of your compressed springs.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Part NumberFBA-SCK0001BL

2. ATP

#ad

ATP Solid Valve Spring Compressor C Clamp Service Kit

#ad
ATP #ad - 5pc pusher for fitting the Valve Spring Correctly & Easier to Compress The Valve. Max jaw opening 9-1/2". Used for car & Motorcycle. Pusher sizes: 16mm, 25mm, 19mm, 23mm, 30mm. Each collet length is 1 & 3/4".
BrandATP #ad
ManufacturerATP technic #ad
Part NumberA
Model13

3. Orion Motor Tech

#ad

Automotive Compression C-Clamp Tool Service Kit for Motorcycle, Car, Orion Motor Tech 10pcs Solid Valve Spring Compressor, ATV, Small Engine Vehicle Equipment

#ad
Orion Motor Tech #ad - Orion motor tech’s outstanding customer service team will promptly follow up with any service request. Handle with caution. Simple operation - close the coil spring compressor until touching the center rod, and insert the compressor into the coil spring.

Efficient valve removal/install - everything you need to safely remove or install valve springs, extension screws, including the wide C-clamp, and pushers with 5 collet sizes for a precise fit on almost any automotive or small engine valve spring and cylinder head. Satisfaction guaranteed - if any component of the toolset is defective, the manufacturer will exchange the product or accept a return. The smooth surface is finished with oxide to resist rust and corrosion.

Carefully compress the spring for removal or install and only release compression when the spring is set for install. Tool storage case - this toolset comes packaged in a high-impact, custom-molded case that holds each part securely for convenient organization and easy transport. Durable steel construction - with forged steel construction for superior strength and hardness, this C-Clamp will not bend or twist under the stress of compressing valve springs.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Weight4.63 Pounds
Part NumberFBA-SCK000100
Model13

4. HFS

#ad

HFS R Car Engine Overhead Valve Spring Remover Installer Valve Spring Compressor Tool Kit

#ad
HFS #ad - Application: this 24-piece set is suitable for OHV and OHC gas or diesel engines. Easy to use: multiple holes on the bracket can be used to adjust the compression arm; there are large openings on both sides of the compression tube for easy removal and installation of springs; two general-size spark plug holes are used for the air cylinders on both sides of the exhaust pipe.

Portability: the portable blow molded suitcase is equipped with a handle, which is convenient for transportation, safe storage and quick organization. Durable: it is made of forged steel, has the greatest strength and life, with black surface treatment, and can prevent rust and corrosion; the rod is made of iron.

Features: use the car engine overhead valve spring tool kit to install, remove and compress the car valve spring without carefully removing the cylinder head from the engine. Used in most imported and family cars.
BrandHFS #ad
ManufacturerHFS #ad
Part NumberETK-24PCS

5. OTC

#ad

OTC 4842 Heavy Duty Valve Spring Compressor

#ad
OTC #ad - Otc's heavy duty valve spring Compressor quickly and easily compresses valve springs for removal or installation. 1 year limited warranty. Kit includes 16 mm, 23 mm, 19 mm, 25 mm, and 30 mm valve spring retainer adapters. Durable blow-molded storage case keeps tools contained and organized so they are ready when you need them. Heavy duty steel c-frame has a 9 inch opening with a 5 inch throat.
BrandOTC #ad
ManufacturerOTC #ad
Height3 Inches
Length15 Inches
Weight5 Pounds
Width10 Inches
Part Number4842
Model4842
WarrantyOne Year Limited Warranty

6. ECCPP

#ad

Small Van and Motorcycle Engines, ECCPP 10pcs Overhead Solid Valve Spring Compressor Installer Remover Tool Set C Clamp Service Kit with Extension Screws Fit for Most Vehicles

#ad
ECCPP #ad - Features - forged steel construction with black oxidation surface, Valves are closed by pressurized air, it has strong anti rust and anti-corrosion ability, solid and durable, and would not fall down into the combustion chamber. All collets are 1.

75 inches 4. 4cm long with 9. 5-inch 24. 1cm maximum jaw openings. Suitable - the valve spring installer remover Compressor Tool Set fit for Most Car, ATV, Small Van, UTV and Motorcycle Engines. Make sure the car information before purchasing it, feel free to Contact us if you have any question. What you get - 5pcs metric collets16mm, 1pc spring compressor U clamp, 23mm, 3pcs extension screws, 1pc compression bar, 30mm, 19mm, 25mm, 1PC Plastic blow case for convenient transportation and storage.

It is easy to use under high compression conditions. Compressed springs contain significant stored energy and must be carefully handled and decompressed. Important note - one year warranty for the product. Function - it is used with the engine head still on the engine and in the car, Tool bolts to the head while the lever pivots from the base to compress the spring, or with the Engine head removed, used to easily and safely compress valve springs for removal or installation.
BrandECCPP #ad
ManufacturerECCPP #ad
Height1.97 Inches
Length13.19 Inches
Weight0 Pounds
Width7.87 Inches
Part Number105427-5211-1923126371
Model105427-5211-1923126371
Warranty1 year warranty for the product

7. AEagle

#ad

Car, Small Engine Vehicle Equipment, ATV, Auto Valve Spring Compressor C Clamp Tool Set Service Kit for Motorcycle

#ad
AEagle #ad - Built to last: each component is constructed from high-quality metal with a black-oxide finish for maximum strength and longevity that resists rust and corrosion. Package contents: package includes 5 metric collets – 16mm, 1 compression bar, 25mm, 30mm, 3 extension screws, 1 spring compressor U-clamp with a maximum jaw opening of 9.

5 inches, 19mm, 23mm, and 1 storage case. Safe & easy compression: the abn auto valve spring Compressor C Clamp Tool Set Service Kit includes 5 adaptors to correctly fit, install, and remove automotive valve springs. Various fuction: suitable for your motorcycle, utv, car, atV, and other small engine vehicles and equipment; All collets are 1.7

75 inches 4. 4cm long with 9. 5-inch 24. 1cm maximum jaw openings. Easy storage: heavy-duty 13. 3” x 8” x 2. 3” inch 33. 8cm x 203cm x 5. 8cm plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
BrandAEagle #ad
ManufacturerAEagle #ad
Part NumberTL0005

8. SCITOO

#ad

SCITOO Pro Cylinder Head Service Set Tool Kit Valve Spring Compressor Removal Installer Fit for 8 16 and 24 Valve Engines

#ad
SCITOO #ad - Note- we provide 1 year warranty for you. Benefit - made by steel construction, solid and durable, Valves are closed by pressurized air, and would not fall down into the combustion chamber.

Please contact us if you have any question or problem. Feature- it allows the removal of stem oil seals squarely and without damage to the springs. Function - designed to use with valve spring remover installer still on the engine and in the car, or with Valve Spring Remover Installer removed, Tool bolts to the head while the lever pivots from the base to compress the spring. The valve pliers can extend downward into the restricted area of the seal from around the valve stem to clamp the seal for removal or installation. Applications - the tool Set Fit for 8 16 and 24 valve engines.
BrandSCITOO #ad
ManufacturerSCITOO #ad
Height2.56 Inches
Length19.69 Inches
Weight10.67 Pounds
Width8.66 Inches
Part Number105425-5206-1555363711
Model105425-5206-1555363711

9. ABN

#ad

ATV, Car, ABN Auto Valve Spring Compressor C Clamp Tool Set Service Kit for Motorcycle, Small Engine Vehicle Equipment

#ad
ABN #ad - Built to last: each component is constructed from high-quality metal with a black-oxide finish for maximum strength and longevity that resists rust and corrosion. Easy storage: heavy-duty 13.

3” x 8” x 2. 3” inch 33. 8cm x 203cm x 5. 8cm plastic blow-molded carrying case for easy transportation, safe storage, and quick organization. Package contents: package includes 5 metric collets – 16mm, 1 compression bar, 25mm, 19mm, 1 spring compressor U-clamp with a maximum jaw opening of 9.55 inches, 30mm, 3 extension screws, 23mm, and 1 storage case for your convenience.

Safe & easy compression: the abn auto valve spring Compressor C Clamp Tool Set Service Kit includes 5 adaptors to correctly fit, install, and remove automotive valve springs. Various applications: suitable for your motorcycle, car, UTV, atV, and other small engine vehicles and equipment; All collets are 1.75 inches 4. 4cm long with 9. 5-inch 24. 1cm maximum jaw openings.
BrandABN #ad
ManufacturerABN #ad
Height2.3 Inches
Length13.3 Inches
Weight3.2 Pounds
Width8 Inches
Part Number2123
Model8542038610

10. CTA Tools

#ad

CTA Tools 2112 Valve Spring Compressor Kit

#ad
CTA Tools #ad - Item package Weight:3. 45 pounds. Product type:Hose Pipe Fitting. Country of origin: Taiwan, Province Of China. Item package dimension:40132 cm l x22. 86 cm w X4. 826 cm H.
BrandCTA Tools #ad
ManufacturerCTA Tools #ad
Height2 Inches
Length16 Inches
Weight3.65 Pounds
Width7 Inches
Part Number2112
Model2112