As an Amazon Associate I earn from qualifying purchases.
Powerbuilt #ad - For pulling and installing power steering pump and alternator pulleys. Built to exceed tool standards. Kit 20 includes 14-piece for removal and installation of the power steering pump and alternator pulleys. Storage case includes usage photos.
OEMTOOLS #ad - Works with many vehicles: this power steering pump pulley tool comes with two screws for use on most Ford, GM, Chrysler, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps; Pulls pulleys on GM belt-driven vacuum pumps.
Power steering pulley installer and remover: our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles; Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
Heavy-duty power puller: the pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability; Power steering pump pulley installer designed to tackle any small pulley job. Product specifications: pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches; Pulls pulleys on GM belt driven vacuum pumps; Pulls pressed-on water pump pulleys of GM V6 engines.
OTC #ad - Housed in a blow molded storage case to protect and organized components. Fits pulley hubs with diameters of 1-1/8 inch, 1-1/4 inch, 1-5/16 inch and 1-3/8 inch.
ABN #ad - Package contents: package includes a disconnect tool, screw set, bushing, and carrying case for your convenience; For GM 1989+ 1T, 1/2T, and 3/4T pickups. Easy to use: we recommend using lubrication on the tools before use; place the threaded screw in the center of your pulley with the half-moon clamp shells and lip retaining ring surrounding it, tightly screw the threaded stud onto the center of the end of your puller nut, then place the grabber nut center piece with a die on top, crescent wrench, and then use a ratchet, or air gun with socket to loosen and remove.
Easy storage: heavy-duty 9. 3” x 2. 1” x 5. 5” inch 23. 6cm x 5. 3cm x 14cm plastic blow-molded carrying case for easy transportation, safe storage, and quick organization. Fits your vehicle: for use on saginaw, and chrysler vehicles; two included screws for use on most ford, 3400 and 3800 v6 engines or 2. 3ll quad 4 four-cylinder engine, and ford C111, and Volkswagen VW power steering pulleys GM 3.
Orion Motor Tech #ad - Durable performance: each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right; each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
Wide compatibility: this pulley pump removal kit is compatible with the saginaw, gM, and Ford C111 C2 power steering pumps in most Ford, thompson, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM's V6 engines; the two forcing screws also work with most VW vehicles' power steering systems.
Complete 7-piece set: this pulley pump puller kit includes a pulley remover, a pulley installer, 1 sleeve, 2 puller jaws, 2 forcing screws, and a disconnect tool; the reversible puller jaw design also lets you check and repair pulley flanges with greater ease. User friendly: this power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation; the custom blow-molded case keeps everything well organized and easy to store or carry between jobs.
Performance Tool #ad - Removes and installs GM power steering pump pulleys. Removes and installs pulleys on the following: 1990 – current chevy lumina apv, 1990 – current pontiac trans sport, 1990 – current oldsmobile Silhouette, 1991 – Current Chevy Lumina with 3.
CATUDIY #ad - Main functionthe power steering pump pulley remover and installer tool kit is a disconnect tool set that releases the power steering pulleys from the pump and installs. Place the threaded screw in the center of your pulley with the half-moon clamp shells and lip retaining ring surrounding it, then place the grabber nut center piece with a die on top.
Tightly screw the threaded stud onto the center of the end of your puller nut, and then use your tool of choice to loosen and remove.
1 l and 3800 v-6 engines. Package include1pc ps pump pulley installer, 1pc 3/8 - 16 unc screw, 1pc power steering pulley spacer, 1pc Power Steering Pump/Alternator Pulling Remover, and 1pc 5/8 - 18 UNF screw. Wide applicationcompatible for GM/Chrysler vehicles/ Saginaw/Thompson, C111 and C2 power steering pumps. Easy operationuse lubrication on the tools prior to use.
Thorstone #ad - Package - blow molded carrying case for easy transportation, safe storage and quick organization. Sincerely thanks for your support to Thorstone!100% sale support -we back up all products for life, 24*7 fast response customer service free all your concerns.
Compatibility - fits on late gm, ford and Chrysler engines; Includes special adapters for GM 3.
Performance Tool #ad - For use on most Ford power steering pump pulleys. Early model chrysler, gm, vw, and Ford with 3/8”-16 threaded internal pulley shafts. Installs pulleys without damage to pump by exerting force only through the shaft.
1. Powerbuilt
#adStorage Case, 648605, Replace Vehicle Steering Pump, Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set, Car Repair Tools
#adMore information #ad
For use on most power steering pump pulleys. Tool set for removal and installation of power steering pump and alternator pulleys. Tool solutions for most all situations. Includes special installer adapters, puller assembly with thrust bearing, jaw and sleeve. Made to be the most reliable tools in the market today.| Brand | Powerbuilt #ad |
| Manufacturer | Alltrade Tools #ad |
| Height | 7.25 Inches |
| Length | 3 Inches |
| Weight | 2 Pounds |
| Width | 9.25 Inches |
| Part Number | 648605 |
| Model | 648605 |
More information #ad
2. OEMTOOLS
#adGM, Ford, green, VW , OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles
#adPower steering pulley installer and remover: our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles; Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
More information #ad
Convenient storage: our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability; Take this power steering pump puller/installer from job to job while keeping your puller kit organized. Heavy-duty power puller: the pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability; Power steering pump pulley installer designed to tackle any small pulley job. Product specifications: pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches; Pulls pulleys on GM belt driven vacuum pumps; Pulls pressed-on water pump pulleys of GM V6 engines.
| Brand | OEMTOOLS #ad |
| Manufacturer | OEMTOOLS #ad |
| Height | 1 Inches |
| Length | 1 Inches |
| Width | 1 Inches |
| Part Number | 37031 |
| Model | 37031 |
| Warranty | OEMTOOLS Limited Lifetime |
More information #ad
3. OTC
#adOTC Tools 4530 Power Steering Pump Pulley Service Set
#adMore information #ad
| Brand | OTC #ad |
| Manufacturer | OTC Tools #ad |
| Height | 1.6 Inches |
| Length | 7.3 Inches |
| Weight | 2 Pounds |
| Width | 9.2 Inches |
| Part Number | 4530 |
| Model | 4530 |
| Warranty | One (1) year limited warranty |
More information #ad
4. ABN
#adChrysler Truck, ABN Automotive Power Steering Pump Pulley Remover Installer Tool Kit – Puller Removal Set for GM, Ford
#adMore information #ad
Effortlessly remove power steering lines: the abn automotive power steering pump pulley remover installer tool kit is a disconnect toolset that releases and installs the power steering line from the pump on most American domestic vehicles such as 1989 to current GM pickups 1T, 1-5/16 inch, 1/2T, and 3/4T; Fits pulley hubs with diameters of 1-1/8 inch, 1-1/4 inch, and 1-3/8 inch. Easy storage: heavy-duty 9. 3” x 2. 1” x 5. 5” inch 23. 6cm x 5. 3cm x 14cm plastic blow-molded carrying case for easy transportation, safe storage, and quick organization. Fits your vehicle: for use on saginaw, and chrysler vehicles; two included screws for use on most ford, 3400 and 3800 v6 engines or 2. 3ll quad 4 four-cylinder engine, and ford C111, and Volkswagen VW power steering pulleys GM 3.
| Brand | ABN #ad |
| Manufacturer | ABN #ad |
| Height | 2.1 Inches |
| Length | 9.3 Inches |
| Weight | 2.09 Pounds |
| Width | 5.5 Inches |
| Part Number | 2183 |
More information #ad
5. Orion Motor Tech
#adOrion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, GM, and Chrysler, Pump Pulley Remover Installer Tools Compatible with Ford
#adWide compatibility: this pulley pump removal kit is compatible with the saginaw, gM, and Ford C111 C2 power steering pumps in most Ford, thompson, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM's V6 engines; the two forcing screws also work with most VW vehicles' power steering systems.
More information #ad
Power steering repair set: this orion motor tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter. Complete 7-piece set: this pulley pump puller kit includes a pulley remover, a pulley installer, 1 sleeve, 2 puller jaws, 2 forcing screws, and a disconnect tool; the reversible puller jaw design also lets you check and repair pulley flanges with greater ease. User friendly: this power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation; the custom blow-molded case keeps everything well organized and easy to store or carry between jobs.
| Brand | Orion Motor Tech #ad |
| Manufacturer | Orion Motor Tech #ad |
| Height | 2 Inches |
| Length | 9 Inches |
| Weight | 2 Pounds |
| Width | 8 Inches |
| Part Number | SP04-RD |
| Model | SP04RD |
| Warranty | 1 year warranty |
More information #ad
6. Performance Tool
#adPerformance Tool W87022 GM Power Steering Pump Pulley
#adMore information #ad
1l v-6, 1991 – current Buick Regal with 3. 1l v-6, 1991 – current pontiac Grand Prix with 3. 1l v-6. Removes pulleys on the following: 1988 – 89 Quad 4 Engines. Exerts force only through the shaft to prevent damage to pump and pulley. Installs pulleys on the following: 1988 – Current Quad 4 Engines.| Brand | Performance Tool #ad |
| Manufacturer | Wilmar Corporation #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 1.05 Pounds |
| Width | 0 Inches |
| Part Number | W87022 |
| Model | W87022 |
More information #ad
7. CATUDIY
#adCATUDIY Automotive Power Steering Pump Pulley Remover Installer Tool Kit, Power Steering Pump Puller Set with Puller Removal Set Compatible for Ford/GM/Chrysler
#adTightly screw the threaded stud onto the center of the end of your puller nut, and then use your tool of choice to loosen and remove.
More information #ad
Specially designfits for 1 1/8inches, 1 1/4inches, 1 5/16inches, and 1 3/8inches pulley hub diameters including 1988 and newer compatible for GM cars equipped with Quad 4 engines; 1991 and newer compatible for GM minivans with 3.11 l and 3800 v-6 engines. Package include1pc ps pump pulley installer, 1pc 3/8 - 16 unc screw, 1pc power steering pulley spacer, 1pc Power Steering Pump/Alternator Pulling Remover, and 1pc 5/8 - 18 UNF screw. Wide applicationcompatible for GM/Chrysler vehicles/ Saginaw/Thompson, C111 and C2 power steering pumps. Easy operationuse lubrication on the tools prior to use.
| Brand | CATUDIY #ad |
| Manufacturer | CATUDIY #ad |
| Part Number | FED6 |
More information #ad
8. Thorstone
#adThorstone Power Steering Pulley Puller Installer Kit for Water Pump, Vacuum Pump Pulleys Installation Remover on Most Engines
#adCompatibility - fits on late gm, ford and Chrysler engines; Includes special adapters for GM 3.
More information #ad
2 quad 4 engines and Ford Modular engines. Application - used for removing and installing pressed-on alternator, power steering pump and other pulleys. High-quality - made of high carbon steel construction and excellent manufacturing process, exquisite mold and screws for your comfort.| Brand | Thorstone #ad |
| Manufacturer | Thorstone #ad |
| Part Number | 46531 |
More information #ad
9. OTC
#adOTC 4681 Power Steering Pump/Alternator Remover/Installer Tool
#adOTC #ad - Also removes and installs other press-fit pulleys. Reversible 2-in-1 tool removes and installs press-fit alternator and power steering pump pulleys. Hub diameter of 1-1/8" 1-1/4" 1-5/16" and 1-3/8".More information #ad
| Brand | OTC #ad |
| Manufacturer | OTC #ad |
| Height | 2 Inches |
| Length | 4 Inches |
| Weight | 0.59 Pounds |
| Width | 5.8 Inches |
| Part Number | 4681 |
| Model | 4681 |
| Warranty | Limited lifetime warranty |
More information #ad
10. Performance Tool
#adPerformance Tool W87021 Power Steering Pump Pulley Installer
#adMore information #ad
| Brand | Performance Tool #ad |
| Manufacturer | Wilmar Corporation #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0.6 Pounds |
| Width | 0 Inches |
| Part Number | W87021 |
| Model | W87021 |
More information #ad
