Top 10 Pilot Bearing Puller – Puller Sets

As an Amazon Associate I earn from qualifying purchases.



8MILELAKE Pilot Bearing Puller 3 Jaw Bushing Gear Extractor Wheel Bearing Pullers Set

8MILELAKE #ad - Material:the overall use of chromium vanadium just manufacturing, good toughness, high hardness, strong and durable. Specified range:removes all sleeve-type bearings with 1/2"-2"inside diameter. Size: 200x135mm. Design:structure design, gently turning the small wrench can produce a strong pull force. Protection:forged and heat treated steel jaws, Three jaw design applies even pressure preventing damage to bearings, Corrosion-resistant black oxide finis.
Brand8MILELAKE #ad
Manufacturerfreebirdtrading #ad
Height1.38 Inches
Length4.72 Inches
Width1.38 Inches
Part NumberJJ326

2. Powerbuilt


Powerbuilt 648619 Pilot Bearing Puller

Powerbuilt #ad - Tool set for removal of the pilot bearing and bushings from the flywheel during clutch replacement. Storage case includes usage photos. Kit 8 includes 1-piece for removal of pilot bearing and bushings from the flywheel during clutch replacement. Made to be the most reliable tools in the market today. Heavy duty puller with 1 1/2-Inch fingers for an extra deep reach. Tool solutions for most all situations. Built to exceed tool standards. Plated steel and black oxide.
BrandPowerbuilt #ad
ManufacturerAlltrade Tools #ad
Height7.25 Inches
Length2.88 Inches
Width9.13 Inches
Part Number648619



OEM TOOLS 25089 Pilot Bearing Puller | Auto Mechanic Hand Tool for Removing and Replacing Pilot Bearings from The End of The Crankshaft | Min/Max Reach: 3/16" to 1-1/4" | Heavy Duty Design

OEM TOOLS #ad - Min/max reach: 3/16" to 1-1/4". Used to pull pilot bearing from end of crankshaft. For easy removal of pilot bearing. Restriction plate prevents the jaws from spinning when force is applied.
BrandOEM TOOLS #ad
ManufacturerOEMTOOLS #ad
Height1.9 Inches
Length6.8 Inches
Weight2.35 Pounds
Width3.7 Inches
Part Number25089
WarrantyOEMTOOLS Limited Lifetime

4. OTC


OTC 4421 2-Jaw Pilot Bearing, Thrust Washer, and Small Bearing Pulling Attachment

OTC #ad - Dual thread design works with both 5/8-18 and M18-1. 5 threaded slide hammer shanks. Minimum reach is 1/8 inch and maximum reach is 1 inch. Removes pilot bearings, pilot bushings, thrust washers, and smaller bearings hidden in a shaft or housing. Jaws require a minimum 5/8 inch opening and can range up to a maximum 1-1/2 inch diameter opening. High-grade materials ensure quality performance over the lifetime of the tool.
BrandOTC #ad
ManufacturerOTC #ad
Height0.3 Inches
Length6 Inches
Weight0.8 Pounds
Width1.5 Inches
Part Number4421
WarrantyOne Year Limited Warranty

5. OTC


OTC 7318 Close Quarters Flywheel Pilot Bearing Puller

OTC #ad - Id reach of 3/4 inch. Capacity of 1/2 inch to 1-1/2 inch. Designed to pull flywheel pilot bearings in close quarters where a slide hammer cannot be used. Operates on many models with engine in chassis. High-grade materials ensure quality performance over the lifetime of the tool.
BrandOTC #ad
ManufacturerOTC #ad
Height5.6 Inches
Length11 Inches
Weight3.4 Pounds
Width3.2 Inches
Part Number7318
WarrantyLimited lifetime warranty

6. Orion Motor Tech


Slide Hammer Pilot Insert Inner Internal Bearing Removal Tool Set, Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit, 16PCS

Orion Motor Tech #ad - Perfect for professional and diy use, ideal for pulling jobs and will not damage parts in using, perfect for professional and DIY use. Wide compatibility, blind / internal /Bearing Puller, comes with various size and type of collets, this tool set boasts wide compatibility.

Portability, comes with a durable storage case, you can neatly collect the tools and easily bring it to anywhere you like. Durability, this bearing puller set features high hardness and toughness for optimal performance. Collets made of chrome molybdenum steel ensure rust-proof performance and long-lasting using. Easy to use, this kit is easy to use, just insert the collect and expand it to fit the hole.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Height4.72 Inches
Length18.5 Inches
Width12.59 Inches
Part NumberOMT-BJS000100
Warranty2 Years Warranty, Free Replace or Full Refund

7. CTA Tools


CTA Tools 8077 Slide Hammer Pilot Bearing Puller Tool

CTA Tools #ad - 8057. Range: 05 - 1. 5-inch 13mm - 38mm. Perfect for inside pulling jobs; the jaws will remove flywheel pilot and other bearings. Extra long 205-inch length for added reach. Similar to No.
BrandCTA Tools #ad
ManufacturerCTA Tools #ad
Height1.75 Inches
Length25.5 Inches
Weight3.7 Pounds
Width6 Inches
Part Number8077

8. OTC


OTC 1172 2-Jaw Pilot Bearing/Bushing Puller with Slide Hammer

OTC #ad - High-grade materials ensure quality performance over the lifetime of the tool. Also useful for pulling electric motor, generator, and magneto bearings. Reach is 1-3/4 inch; spread is 1/2 inch to 2 inches; weighs 4 lbs. 14 oz. Hammer and 1/2-20 threaded end. Slide hammer unit measures 17 inches long with a 1-3/4 lb. Versatile puller built specifically for light duty inside pulling jobs - particularly for removing flywheel pilot bearings and bushings from automobiles, trucks, and tractors.
BrandOTC #ad
ManufacturerOTC #ad
Height1.8 Inches
Length20.7 Inches
Weight0.1 Pounds
Width3.3 Inches
Part Number1172
WarrantyLimited lifetime warranty

9. Qiilu


Pilot Bearing Puller,Qiilu 3 Jaw Pullers Set Bushing Gear Extractor Wheel Bearing Puller Heavy Duty Automotive Machine Tool Kit for Car SUV

Qiilu #ad - Bearing range-bearing puller uses in removing all sleeve-type bearings from diameter 06" to 1-1/2" 16mm-38mm. Structure design, gently turning the small wrench can produce a strong pull force.

Spcial 3 jaw-3 jaw gear puller removes pilot bearings, pump bearings, brushings. High quality-qiilu 3 jaw extractor is corrosion-Resistant Black Oxide Finish. Application-puller set is ideal for: automotive flywheel, Pump bearing generator bearing, Motorcycle wheel, Bicycle wheel, Machine bearing etc. Idea tool-three jaw design applies even pressure Preventing Damage to Bearings. Forged and Heat Treated Steel Jaws. The overall use of chromium vanadium just manufacturing, high hardness, good toughness, strong and durable.
BrandQiilu #ad
ManufacturerQiilu #ad
Part NumberQLU-123

10. OTC


OTC 4420 2-Jaw Pilot Bearing Pulling Attachment with Two Sets of Jaws

OTC #ad - Use to pull a pilot bearing or bushing from the end of the crankshaft. Interchangeable jaws - one set of jaws covers a spread of 1/2 inch to 1-1/2 inches, the other set of jaws covers a spread of 3/8 inch to 1-3/8 inches; both sets of jaws have a reach of 1 inch. High-grade materials ensure quality performance over the lifetime of the tool. Reach has a min/max range of 3/16 inch to 1 inch. Puller attaches to otC and other slide hammers with 5/8-18 threads.
BrandOTC #ad
ManufacturerOTC #ad
Height2 Inches
Length5.3 Inches
Weight1.2 Pounds
Width2 Inches
Part Number4420
WarrantyOne Year Limited Warranty