Top 10 Nilight 2PCS Mounting Base Bracket Led Light Bar Slide Mount Bracket – Automotive Light Bars

As an Amazon Associate I earn from qualifying purchases.

1. Nilight

#ad

Nilight 2PCS Mounting Base Bracket LED Light Bar Slide Mount Bracket 2 years Warranty 90034B

#ad
Nilight #ad - Adjustable bracket:the pod can be adjusted to about 45 degrees, which makes changing direction of light beam easier. Sliding black block: no need drilling, if there is a mounting hole before, the sliding block can slide left and right to fit the existing holes.

High quality: it is made of strong and lightweight aluminum alloy material. Easy to use: works with led light bar, directly mount onto your bull bar, grille guard, car top racks, side mount screws and bolts, etc. The sturdy bracket can firmly fix the light bar. Fit type: Universal Fit. Fitment: apply to most slide mounted led light bars: 18w, 108W, 126W, 198W, 252W, 162W, 72w, 36W, 234w, etc. Quakeproof when passing through rugged terrain.
BrandNilight #ad
ManufacturerNilight #ad
Part Number90034B
Model90034B
Warranty2 years Warranty

2. Nilight

#ad

Nilight 2PCS Base Mounting Brackets Universal Slide Bracket Kits for LED Light Bar, Model: 90035B, 2 years Warranty

#ad
Nilight #ad - Jeep, truck, farming, suV, UTV, Tractor and so on. Adjustable bracket: the max adjustable angle of the mounting bracket was 45 degree. Package included: 2pcs base mounting brackets, screws, bolts and mounting tools.

High quality: premium die-cast aluminum alloy material protect the base mounting brackets from rust and corrosion, passed physically tested ensures many years lifespan. Fit type: Universal Fit. Also can be free slide in the back of LED light. Allow you to change the direction of light beam, lighting every corner. Easy to install: mounting the brackets on your LED light and tighten anti-loose screws, need not worry about fall down and shaking. Wide application: fit for 4 inch to 54 inch led pods and led light bars, 4wd, ATV, suitable for most kinds of Car, Off Road.
BrandNilight #ad
ManufacturerNiligh #ad
Part Number90035B
Model90035B
Warranty2 years Warranty

3. LEDMIRCY

#ad

Base Mounting Bracket LED Light Bar Slide Mounting Bracket 2PCS Universal Adjustable Side Bracket Kit Holder for Most Straight or Curved Light Bars Pods Work Lights Fog Lights pack of 2

#ad
LEDMIRCY #ad - Light bar mounting bracket: great for most base slide mounting bracket straight or curved led light bar from 4 inch up to 52 inch, 120W, 180W, 72W, 18W, 36W, etc. Straight or curved pods light bar mounting slide bracket: allows to adjustable the viewing angle freely with 70 degrees to ensure maximum visibility.

Warranty & package: a pair of slide mounting base brackets and a pair of Rubber pad, Easy Installation with tools and accessories, Bolts, Washers, Comes with all the Necessary Mounting Hardware as Nuts, Allen Wrenches and some necessary accessories to install these brackets. Works with led light bar with side mount screws and bolts, grille guard, mount directly onto your bull bar, car top racks, etc. Apply to all pods light Bar with base slide bracket double mount screws LED light bars. Easy and straight or curved forward installation : firmly hold the slide mounting bracket on the LED light bar use necessary hardware on the place that you want to install, such as bull bar, roof racks, grille guard tube, etc.

Base mounting bracket design: the slide mounting bracket made of black aluminum material, weather-proof, anti- rust and anti-corrosion, Nicely Powder Coat Black Finish, sturdy and durable, great quake proof ability, raise the light bar height to avoid scratches while driving .100% risk free satisfaction guarantee; 365 Days Money Back Guarantee; 24 hours online heartfelt service. If you have anything, 108W, please feel free to contact us. We will be happy to solve it.
BrandLEDMIRCY #ad
ManufacturerMXLIGHT #ad
Part NumberBase Mounting Bracket

4. Nilight

#ad

LED Light Bar Mounting Bracket, Nilight 2PCS Universal Adjustable Pillar Hood Led Work Light Mount Bracket Clamp Holder for Off Road Jeep Truck SUV Installing Without Drilling, 2 Years Warranty

#ad
Nilight #ad - Package include: 2 x 304 stainless steel brackets Lamp is not included. 2 x hex Allen wrench. The clamp kit comes with anti-slip teeth and rubber pad to make sure a firm installation and no scratches left on the surface of the hood.

Free adjustability: you’re able to freely adjust 180°up and down and 60°left and right to make sure your light is at the exact lighting direction and at a perfect lighting angle. No drilling &anti-slip design: no drilling is required, just clamp the kit and tighten up. As only the max limit of the clamp board thickness on the vehicle is within 8mm. Durable material: made of sturdy 304 stainless steel, protecting itself well from corrosion and rust in bad weather. High compatibility: can used to mount different thickness of work lights, fog lights, driving lights etc.
BrandNilight #ad
ManufacturerNiligh #ad
Height1.57 Inches
Length4.33 Inches
Weight0.46 Pounds
Width1.97 Inches
Part Number90043B
Model90043B
Warranty2 Years Warranty

5. Nilight

#ad

2 Years Warranty, Nilight 90020B 2 Pack Mounting Bracket Kit LED Off Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder

#ad
Nilight #ad - Wide application: can be used on tubes of 1", 1-1/2", 1-3/4" & 2" In diameter and applied to LED light bar for almost all kinds of vehicle. Package includes: 2Pcs LED light bar mounting bracket.

Simplifies the installation of nilight off road LED light bars onto the roof rack, roll cages bull bar or head rack of your ATV, UTV and trucks. Useful rubber: high quality rubber inserts dampen driving vibration and avoid scraping bull bar surface. Sturdy bracket: strong aluminium alloy, fix the light on tube firmly, raise the light bar height to avoid scratches while driving. Easy installation: pre-drilled hole, allows more lights to be added to vehicle without drilling, Allen hex key included for quick installation.
BrandNilight #ad
ManufacturerNilight #ad
Height2 Inches
Length3 Inches
Weight0.9 Pounds
Width3 Inches
Part Number90020B
Model90020B
Warranty2 years Warranty

6. Nilight

#ad

Nilight 90042B 2PCS Magnetic Base LED Light Bar Mounting Brackets, 2 Years Warranty, Powerful Sucker Holder for Bottom-Mounted Offroad LED Work Light Mounting on Hood

#ad
Nilight #ad - Once matching well with the flat surface, it is strongly held even on emergency braking or driving on the rugged mountain road. Easier mounting: no drilling needed, just do flattest, and then mount the whole kit on the mounting position.

Strong hold: each magnetic base comes with 12 PCS magnets. For detailed mounting tips, mount the light on the bracket, please the 7th picture on the left. Package include: 2 x magnetic mounting base. Anti-scratch: the magnetic bases are coated with rubber cover to protect from scratching the hood and add on a secure installation. Multiple mounting functions: you can use a single magnetic base separately to mount small led work light, or use two or three together to mount a longer bottom-mounted LED light bar.
BrandNilight #ad
ManufacturerNilight #ad
Height1.14 Inches
Length4.53 Inches
Weight0.62 Pounds
Width4.06 Inches
Part Number90042B
Model90042B
Warranty2 Years Warranty

7. Nilight

#ad

Nilight 90025B Led Light Bar Mounting Brackets 2pcs Universal Hood Led Work Light led Pods Mount Bracket Clamp Holder for SUV Truck Off Road Installed No Need Drilling, 2 Years Warranty

#ad
Nilight #ad - Easy to install. Made of 304 stainless steel, can ensure absolute anti-rust, the surface covered with rubber anti-rust paint, anti-corrosion. Universal: it can be used to install almost all LED Light Pods. No any damage to the car surface paint. Anti-slip surface: the surface contacting with the front cover of the car covers a multi-layer non-slip composite material and loss prevention materials to ensure that the contact surface of the bracket will not damage the car surface paint. Stable & durable: five Screws are enough to tight the light with the car cover tightly.
BrandNilight #ad
ManufacturerNilight #ad
Part Number90025B
Model90025B
Warranty2 Years Warranty

8. Nilight

#ad

Nilight 2PCS Magnetic Base LED Light Bar Mounting Brackets, Powerful Sucker Holder for Straight Curved Side-Mounted LED Light Bar Mounting on Hood Roof, 2 Years Warranty

#ad
Nilight #ad - Strong hold: each magnetic base comes with 12 pcS magnets. For detailed mounting tips, please check the 9th picture on the left. For the “l” shape bracket, or remove “L” shape bracket, you can also choose to mount them inward or outward.

Dual mounting functions & directions: can be used as a whole to mount side-mounted light, just use the magnetic base to mount bottom-mounted light. Easier mounting: no drilling needed, mount the light on the bracket, just do flattest, and then mount the whole kit on the mounting position. Fit type: Universal Fit. Package include: 2 x magnetic mounting brackets with sucker base.

Once matching well with the flat surface, it is strongly held, no falls down even on emergency braking or driving on the rugged mountain road. All works well and still remain ample room to adjust the mounting angle of the light. High compatibility: can be used on the hood or roof to mount any side-mounted light bars, double row, triple row, straight or curved, single row, or quad row.
BrandNilight #ad
ManufacturerNilight #ad
Height4 Inches
Length8 Inches
Width4 Inches
Part Number90041B
Model90041B
Warranty2 Years Warranty

9. Nilight

#ad

Nilight, 90026B 2PCS Jeep JK A-Pillar Windshield Hinge Mounting Brackets for Offroad LED Fog Light Halogen Work Light for 2007-2017 Jeep Wrangler JK,2 years Warranty

#ad
Nilight #ad - Just find your jeep’s factory holes and stock bolts, and then mount the brackets on and lock. Excellent protection: padded backplate between the contact area of the jeep and mounting bracket, preventing your jeep from being worn down.

Mounting bolts are not included. Package include: 2 pieces jeep JK A-Pillar windshield mounting brackets. Applicable vehicles: 2007-2017 jeep wrangler JK, the mounting plate contour will perfectly match that of the Jeep JK’s panel contour. Ample room for mounting: length of the mounting plate of the bracket provides ample room for you to mount oversized lights, maximum thickness of the light can be 3. Also ensure a firmer mounting. Free of drilling: no drilling required. 7”.
BrandNilight #ad
ManufacturerNilight #ad
Part Number90026B
Model90026B
Warranty2 Years Warranty

10. Nilight

#ad

60001F-B Led Pods 2PCS 18W 1260LM Flood Led Off Road Lights Super Bright Driving Fog Light Boat Lights Driving Lights Led Work Light for Trucks, 2 Years Warranty, Nilight

#ad
Nilight #ad - High protective performance: ip67 waterproof Rate, waterproof up to 1 meter of water for 30 minutes and effectively dustproof. Special designed lamp cup leads to a wider illumination range, allowing you to see the left and right clearly.

Better heat dissipation: quick cooling aluminum alloy heat sinks and high-quality heat conduction silicone gel can effectively extend the lifespan of the light bar to over 30, 000 hours. Many indoor and outdoor uses: Garden lighting, off road lighting, backyard lighting, back-up light, construction lighting and so on. The stainless mounting brackets are rustproof and anticorrosive. Package includes: 2PCS 18W flood led pods. Super bright and wide illumination range: advanced LED chips give out bright and white ray for clear visibility.
BrandNilight #ad
ManufacturerNilight #ad
Height3 Inches
Length6 Inches
Weight1 Pounds
Width3 Inches
Part Number60001F-B
Model60001F-B
Warranty2 Years Warranty