Top 10 MOOG Chassis Products Rk622916 Control Arm and Ball Joint Assembly – Automotive Replacement Control Arms

As an Amazon Associate I earn from qualifying purchases.

1. MOOG Steering & Suspension

#ad

MOOG RK80669 Control Arm and Ball Joint Assembly

#ad
MOOG Steering & Suspension #ad - Enhanced structural strength -- heat treated to match or exceed OE requirements to inhibit premature failure. Added corrosion protection -- coated studs and e-coated cast iron and steel control arms inhibit premature deterioration.

Comprehensive coverage -- available for foreign and domestic nameplates. Easy to install -- precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box. Highly precise engineering -- optimized bushings for quiet operation and resistance to wear, salt, road grime and oils. Long life -- ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it.
BrandMOOG Steering & Suspension #ad
ManufacturerFederal Mogul #ad
Height4.38 Inches
Length16.17 Inches
Weight6.6 Pounds
Width13.5 Inches
Part NumberRK80669
ModelRK80669
WarrantyLIFETIME MANUFACTURER

2. MOOG Steering & Suspension

#ad

MOOG CK620054 Control Arm and Ball Joint Assembly

#ad
MOOG Steering & Suspension #ad - Absorbs impact -- belleville preload washer helps keep the bearing package tight as bearings wear. Problem solver gusher bearing -- metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life. Keeps dirt and water out -- pre-installed dust boot shields socket components from wear-causing contaminants. Greaseable socket -- reduces corrosion and wear by allowing new lubricant to flush contaminants. Quiet operation -- premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride.
BrandMOOG Steering & Suspension #ad
ManufacturerMoog #ad
Height0 Inches
Length0 Inches
Weight5.92 Pounds
Width0 Inches
Part NumberCK620054
ModelCK620054

3. Detroit Axle

#ad

Front Upper Steel Control Arms + Lower Ball Joints Replacement for Chevy GMC Silverado Suburban Sierra 1500 Avalanche Tahoe Yukon, 4pc Set, Detroit Axle

#ad
Detroit Axle #ad - Kit includes: 2x front upper control Arm w/ Ball Joints + 2x Front Lower Ball Joints. Fits: specific models - check Fitment Chart and Product Description for Accurate Information. Lower ball joints fit Steel Control Arms. 10-year Warranty. Detroit axle suspension components are ready to meet the rigorous demands of today's foreign and domestic passenger cars, trucks, and SUVs.
BrandDetroit Axle #ad
ManufacturerDetroit Axle #ad
Height16 Inches
Length24 Inches
Weight14 Pounds
Width6 Inches
Part Number80010-4B

4. MOOG Steering & Suspension

#ad

MOOG RK80942 Control Arm and Ball Joint Assembly

#ad
MOOG Steering & Suspension #ad - Long life -- ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it. Enhanced structural strength -- heat treated to match or exceed OE requirements to inhibit premature failure.

Comprehensive coverage -- available for foreign and domestic nameplates. Added corrosion protection -- coated studs and e-coated cast iron and steel control arms inhibit premature deterioration. Highly precise engineering -- optimized bushings for quiet operation and resistance to wear, salt, road grime and oils. Easy to install -- precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box.
BrandMOOG Steering & Suspension #ad
ManufacturerFederal Mogul #ad
Height4.38 Inches
Length16.17 Inches
Weight6.4 Pounds
Width13.5 Inches
Part NumberRK80942
ModelRK80942
Warranty2 year manufacturer

5. Detroit Axle

#ad

8-Lug Front Upper Control Arms w/Ball Joints + Tie Rod End + Sway Bar Link Suspension Kit Replacement for Chevy GMC Sierra Silverado Suburban 1500 2500 HD Hummer H2-13pc Set, Detroit Axle

#ad
Detroit Axle #ad - Fits: specific models - check Fitment Chart and Product Description for Accurate Information. Kit includes: 2x front upper control arm w/ball joints, 1x steering pitman Arm, 2x Front Lower Ball Joints, 4x Tie Rod Ends, 2x front sway bar end links, 1x Front Idler Arm and 1x Front Idler Bracket Pivot. Detroit axle suspension components are ready to meet the rigorous demands of today's foreign and domestic passenger cars, trucks, and SUVs. For 8 lug models with 3-Groove Pitman Arm. 10-year Warranty.
BrandDetroit Axle #ad
ManufacturerDetroit Axle #ad
Height16 Inches
Length24 Inches
Weight26 Pounds
Width6 Inches
Part Number80090-13

6. MOOG Steering & Suspension

#ad

MOOG RK620054 Control Arm and Ball Joint Assembly

#ad
MOOG Steering & Suspension #ad - Easy to install -- precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box. Enhanced structural strength -- heat treated to match or exceed OE requirements to inhibit premature failure.

Added corrosion protection -- coated studs and e-coated cast iron and steel control arms inhibit premature deterioration. Comprehensive coverage -- available for foreign and domestic nameplates. Highly precise engineering -- optimized bushings for quiet operation and resistance to wear, salt, road grime and oils. Long life -- ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it.
BrandMOOG Steering & Suspension #ad
ManufacturerFederal Mogul #ad
Height4.4 Inches
Length17.3 Inches
Weight11 Pounds
Width16.3 Inches
Part NumberRK620054
ModelRK620054
WarrantyLIFETIME MANUFACTURER

7. Detroit Axle

#ad

Detroit Axle, 10pc Set, Front Upper Control Arms w/Ball Joints Tie Rods Sway Bars Replacement for Silverado Sierra Suburban 1500 Yukon Escalade

#ad
Detroit Axle #ad - Fits: specific models - check Fitment Chart and Product Description for Accurate Information. 10-year Warranty. Kit includes: 2x front upper control arms, 2x Front Sway Bars, 2x Front Lower Ball Joints, 4x Front Tie Rods. Detroit axle suspension components are ready to meet the rigorous demands of today's foreign and domestic passenger cars, trucks, and SUVs. Lower ball joints fit Steel Control Arms.
BrandDetroit Axle #ad
ManufacturerDetroit Axle #ad
Height8.9 Inches
Length13.39 Inches
Weight22.25 Pounds
Width12.01 Inches
Part Number80010-10C

8. MOOG Steering & Suspension

#ad

MOOG RK80670 Control Arm and Ball Joint Assembly

#ad
MOOG Steering & Suspension #ad - Highly precise engineering -- optimized bushings for quiet operation and resistance to wear, salt, road grime and oils. Added corrosion protection -- coated studs and e-coated cast iron and steel control arms inhibit premature deterioration.

Comprehensive coverage -- available for foreign and domestic nameplates. Easy to install -- precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box. Enhanced structural strength -- heat treated to match or exceed OE requirements to inhibit premature failure. Long life -- ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it.
BrandMOOG Steering & Suspension #ad
ManufacturerFederal Mogul #ad
Height4.38 Inches
Length17 Inches
Weight5 Pounds
Width15 Inches
Part NumberRK80670
ModelRK80670
WarrantyLIFETIME MANUFACTURER

9. Detroit Axle

#ad

Detroit Axle, 19pc Set, 4WD Front Wheel Hubs Bearings + Control Arms + Rear Shocks + Tie Rod Kit Replacement for Silverado Sierra Yukon XL Avalanche 1500 Tahoe

#ad
Detroit Axle #ad - 4wd / awd / 4x4 models only; excludes hd versions; fits 6-lug models w/torsion bar suspension; Pitman Arm is 4 GROOVE; Excludes Electronic Suspension or Z71.

10-year Warranty. Fits: specific models - check Fitment Chart and Product Description for Accurate Information. Hub specifications: position: front | lugs: 6 Bolt | ABS Type: Sensor Wire | Flange Type: 3-Bolt Triangular. Kit includes: 2x front upper control arms w/ ball joints + 4x front & rear shock absorbers + 2x front wheel hubs & Bearings + 2x Front Lower Ball Joints + 2x Front Sway Bar Links + 4x Front Tie Rods + 1x Pitman Arm + 1x Front Steering Idler Arm + 1x Idler Arm Assembly.
BrandDetroit Axle #ad
ManufacturerDetroit Axle #ad
Height6 Inches
Length19 Inches
Weight76.55 Pounds
Width12 Inches
Part Number19SWA2400024

10. KSP PERFORMANCE

#ad

V5.0, KSP Upper Control Arm, Sierra Yukon 6-Lug 2WD/4WD Factory Cast Steel arms, Tubular Fit 2-4" lift for 07-16 Silverado Avalanche Tahoe

#ad
KSP PERFORMANCE #ad - Brand promise:12-month warranty of ball joint and 1-year warranty of control arms with sufficient after-sales service. Universal fitment(6-lug wheel only): avalanche 1500 2007-2016 2wd 4wd |tahoe 1500 2007-2016 2wd 4wd|suburban 1500 2007-2016 2wd 4wd|silverado 1500 new body 2007-2016 2wd 4wd;cadillac: escalade 2007-2016 2WD 4WD.

Update version 3. 0: pu bushing enhances driving performance; Dust cover has longer service life; CNC Machined and red texture finish of the control arms give your vehicle an aggressive look. Safety guarantee: tig welding supply better stable and reinforced structure than MIG welding. Will not work with stamped steel or Aluminum steel. Pay attention that the 2014-2016 Models only fit Factory cast Steel Arms.

We also offer “ 30-day refund ” service, if the time more than one month, we will offer “FREE REPLACEMENT PARTS” service. Constructed from 1. 25” dom tubing for superior strength and durability. And new ball joint dO NOT need to add extra grease within 1 year. Notice: please tighten the zerk at any direction after refilling grease. Do not use excessive force to prevent copper zerk broken. We hope that KSP can make your shopping experience enjoyable.
BrandKSP PERFORMANCE #ad
ManufacturerGoldenlion #ad
Height5.5 Inches
Length14.6 Inches
Width14.2 Inches
Part NumberCA-293055