As an Amazon Associate I earn from qualifying purchases.
Pilot Automotive #ad - Sturdy, ample step- the 100% steel tube step measures 19” wide and 3. 75” in diameter, with a high-impact, anti-skid step pad. Once secured, the rear cargo area. Easy to install - installs in minutes/includes plug-and-play wire harness To install you simply loosen the three bolts and tighten around the factory exhaust pipe.
When hooked up via the included 4-pin connector, the LEDs will also flash along with hazard lights. Provides easy access - to truck beds, roof racks, the lighted hitch cover provides access to your truck bed, and in the case of an SUV, roof racks and SUV interiors.
Bosswell #ad - Wiring harness plugs into your vehicle’s existing 4-pole trailer connector. Hitch cover slides into receiver, keeping out dirt and grime. Less than 1% of the vehicles on the road require an extension/loop to reach the electrical connector.
CZC AUTO #ad - Foam gasket to ensure a snug fit, NOT include hitch pin&clip. Please noted: turning signal indicator lighting function can be realized if you purchase & install 2 items on your car.
Client support: please feel free to contact us at first if there is any problem when you receive or use our products. Czc auto hitch cover light has 12led for brake light, rear fog light function.
Black11 Designs Custom License Plate Frames #ad - Are you looking for something unique for your vehicle? Or looking for that perfect gift? Here is our 3rd generation hitch cover. Whole face lights up red with brakes and hazards.
Give a unique look and extra safety with brake light. Please check the product description below for details and disclaimer before purchase. Connector length: 21". Might be not fully compatible with some newer vehicles.
Nilight #ad - Incredible brightness - the redline led tailgate bar has 108 LEDs that shine 35% brighter than normal chips and ensure your car can be seen even in thickest traffic, day or night. Lifespan.
No need to drill, it will not fall off, included mounting hardware for more secure installation. Multiple use - widely used in truck bed light, pickup bed light Kit, RV Awning Light, Step Bar LED Lighting, side door led lamp, etc.
Mounted anywhere with 12v power source - 60" LED strips, rated 12V, ultra long for cargo/pickup/camper/garage/RV Awning lighting or household party decoration. And wide use for Jeep Pickup Truck RV SUV. No-drilling required - it comes with a tough-as-nails adhesive enhancer that increases hold strength over 5X.
Bully #ad - Protects hitch from rust and corrosion. And 2 in. Eyes can be wired to light-up red. Fits 1. 25 in. Hitch receivers. Triple-chromed ABS plastic.
EVOKE DRIVE #ad - Light-up emblem activates when running lights are on and brightens when the brake pedal is pressed. Hitch cover slides into receiver, keeping out dirt and grime.
Low illumination while you’re using tail lights. Long life LED light powered. High illumination when you brake or turn on the hazard lights. Easy hook-up no tools required Use your current hitch pin.
Bully #ad - Provides function and finish when hitch is not in use. Wiring harness plugs into standard 4-pole plug. Adds visibility to the rear of your vehicle. Illuminates when running lights are on, brightens when the brake pedal is pressed. Fits 2” hitch receivers.
Autogem #ad - Wiring harness plugs into your vehicle’s existing 4-pole trailer connector & Hitch cover slides into receiver, keeping out dirt and grime.
Easy hook up, no tools required. Light-up insignia activates when running lights are on and brightens when brake pedal is pressed Low illumination while you’re using tail lights & High illumination when you brake or turn on the hazard lights.
Bosswell #ad - Light-up emblem activates when running lights are on and brightens when the brake pedal is pressed. Hitch cover slides into receiver, keeping out dirt and grime.
1. Pilot Automotive
#adJeep, GMC, Ford, Bully BBS-1104L Black Bull Series Steel Universal Fit Truck LED Brake Light Hitch Step Fits 1.25" and 2" Hitch Receivers for Trucks from Chevy Chevrolet, Toyota, Dodge RAM
#adWhen hooked up via the included 4-pin connector, the LEDs will also flash along with hazard lights. Provides easy access - to truck beds, roof racks, the lighted hitch cover provides access to your truck bed, and in the case of an SUV, roof racks and SUV interiors.
More information #ad
Lets other drivers see you - the lighted hitch cover features LED brake lights to provide added visibility for other drivers. Universal fit for most hitch receivers - fits 2” and 1-1/4” hitch receivers includes reinforced plastic adapter, which are the most common sizes.| Brand | Pilot Automotive #ad |
| Manufacturer | Bully #ad |
| Height | 3.75 Inches |
| Length | 11.3 Inches |
| Weight | 5.64 Pounds |
| Width | 18.75 Inches |
| Part Number | BBS-1104L |
| Model | BBS-1104L |
| Warranty | Limited Manufacturer Warranty |
More information #ad
2. Bosswell
#adLicensed LED Light Trailer Towing Hitch Cover Receiver Chrome 6062, Bosswell Chevy Hitch Cover
#adMore information #ad
The length of wire is 19 inch from the badge to the end. Light-up emblem activates when running lights are on and brightens when the brake pedal is pressed. Mounting brackets and hardware included for both 1-1/4″ and 2″ receiver tubes. For a clean look, use an extension to place the wire behind the bumper on certain models.| Brand | Bosswell #ad |
| Manufacturer | Ael Industries #ad |
| Height | 3.5 Inches |
| Length | 4.5 Inches |
| Weight | 0.75 Pounds |
| Width | 6 Inches |
| Part Number | HC6062-1 |
| Warranty | 1 year factory warranty |
More information #ad
3. CZC AUTO
#adCZC AUTO Red Lens Trailer Hitch Cover with 12 LED Brake Light Fit 2" Receiver
#adClient support: please feel free to contact us at first if there is any problem when you receive or use our products. Czc auto hitch cover light has 12led for brake light, rear fog light function.
More information #ad
We are always here to support you. Update of wire length: red len size:3" x 3", but not fit special size truck, wire length 18" we increase the cable/wire available length to 18”instead of 10-1/2” for enough useable length wire. Fits standard 2" x 2" hitch receiver, like 2008 3500HD Chevrolet Truck. Super high visibility and Longer Lifetime LED advantage！.| Brand | CZC AUTO #ad |
| Manufacturer | CZC AUTO #ad |
| Height | 3.9 Inches |
| Length | 6.9 Inches |
| Weight | 0.44 Pounds |
| Width | 3.1 Inches |
| Part Number | 101005A |
More information #ad
4. Black11 Designs Custom License Plate Frames
#adUSA Patriotic Eagle American Flag Custom Designed Trailer Receiver LED Brake Light for 2 x 2 inch Tow Hitch Car Truck Accessories American Eagle
#adGive a unique look and extra safety with brake light. Please check the product description below for details and disclaimer before purchase. Connector length: 21". Might be not fully compatible with some newer vehicles.
More information #ad
Compatible with 4 way flat plug. Package includes dielectric grease for safety. Lifetime warranty on graphics. Hitch cover is made of durable ABS plastic and water-resist. Plug and play! the hitch cover is super easy to install and comes with 3 foam pads to ensure snug fit and to prevent rattling. 3” x 3” image size. Fits only 2” x 2” receivers.| Brand | Black11 Designs Custom License Plate Frames #ad |
| Manufacturer | Black11 Designs Custom License Plate Frames #ad |
| Part Number | LED-USA |
More information #ad
5. Nilight
#ad2 Years Warranty, Nilight 60" Truck Tailgate Light Bar 108 LED Single Row Tailgate Light Strip with Red Running Brake Lights Turn Signal White Reverse Light
#adNo need to drill, it will not fall off, included mounting hardware for more secure installation. Multiple use - widely used in truck bed light, pickup bed light Kit, RV Awning Light, Step Bar LED Lighting, side door led lamp, etc.
More information #ad
Ideal for DIY. Flexible & durable led lights - ip67 sealed housing, well protects LED strips against rain drops, super durable and flexible with up to 30, dirt and sand, snow, 000 hrs. Mounted anywhere with 12v power source - 60" LED strips, rated 12V, ultra long for cargo/pickup/camper/garage/RV Awning lighting or household party decoration. And wide use for Jeep Pickup Truck RV SUV. No-drilling required - it comes with a tough-as-nails adhesive enhancer that increases hold strength over 5X.
| Brand | Nilight #ad |
| Manufacturer | Nilight #ad |
| Height | 7 Inches |
| Length | 8 Inches |
| Weight | 0.2 Pounds |
| Width | 0.3 Inches |
| Part Number | TR-01 |
| Model | TR-101-A |
| Warranty | 2 years warranty |
More information #ad
6. Bully
#adBully CR-018 Chrome ABS Plastic Universal Fit Truck Skull LED Brake Light Hitch Cover Fits 1.25" and 2" Hitch Receivers for Trucks from Chevy Chevrolet, Toyota, GMC, Ford, Dodge RAM, Jeep
#adMore information #ad
| Brand | Bully #ad |
| Manufacturer | Bully #ad |
| Height | 3.3 Inches |
| Length | 9 Inches |
| Weight | 0.79 Pounds |
| Width | 5.8 Inches |
| Part Number | CR-018 |
| Model | CR-018 |
| Warranty | 90 Days |
More information #ad
7. EVOKE DRIVE
#adLED Lighted Hitch Cover Compatible with Chevy Trucks Licensed Trailer Towing Receiver Cover
#adLow illumination while you’re using tail lights. Long life LED light powered. High illumination when you brake or turn on the hazard lights. Easy hook-up no tools required Use your current hitch pin.
More information #ad
Hitch pin and clip or hitch lock sold separately. Application: 1-1/4″ x 1-1/4″ and 2″ x 2″ trailer hitch receivers. Wiring harness plugs into your vehicle’s existing 4-pole trailer connector. Mounting brackets and hardware included for both 1-1/4″ and 2″ receiver tubes.| Brand | EVOKE DRIVE #ad |
| Manufacturer | Evoke Drive #ad |
| Height | 3.25 Inches |
| Length | 5 Inches |
| Width | 6 Inches |
| Part Number | ED-6062-Gold |
| Warranty | 1 Year Factory Warranty |
More information #ad
8. Bully
#adBully Brake/Reverse Hitch Light CR-987
#adMore information #ad
| Brand | Bully #ad |
| Manufacturer | Bully #ad |
| Height | 6.5 Inches |
| Length | 4.6 Inches |
| Width | 4.6 Inches |
| Part Number | CR-987 |
| Model | CR-987 |
More information #ad
9. Autogem
#adSkull LED Lighted Trailer Hitch Cover LED Tow Hitch Light Cover Fits 2" & 1-1/4" Both Black
#adEasy hook up, no tools required. Light-up insignia activates when running lights are on and brightens when brake pedal is pressed Low illumination while you’re using tail lights & High illumination when you brake or turn on the hazard lights.
More information #ad
Application: 1-1/4" x 1-1/4" and 2" x 2" trailer hitch receivers. Add a stylish touch to your vehicle with officially licensed, LED Lighted Hitch Cover For a clean look, use an extension to place the wire behind the bumper on certain models.| Brand | Autogem #ad |
| Manufacturer | LAAX #ad |
| Height | 3 Inches |
| Length | 9.8 Inches |
| Width | 4.7 Inches |
| Part Number | 65296523 |
More information #ad
10. Bosswell
#adBosswell Chevrolet Chevy Hitch Cover, Licensed LED Light Trailer Towing Hitch Cover Receiver Black 6530
#adMore information #ad
Long life led light powered and Easy hook-up no tools required. Wiring harness plugs into your vehicle's existing 4-pole trailer connector.| Brand | Bosswell #ad |
| Manufacturer | Ael Industries #ad |
| Height | 3.5 Inches |
| Length | 4.5 Inches |
| Width | 6 Inches |
| Part Number | HC6530 |
More information #ad
