Top 10 Lighted Hitch Cover – Towing Hitch Covers

As an Amazon Associate I earn from qualifying purchases.

1. Bully


GMC, Dodge, and Others, Bully CR-018 Chrome Skull Emblem LED Light Trailer Tow Hitch Receiver Cover with Plug In LED Brake Lights for Chevy, Toyota, Ford

Bully #ad - Protects hitch from rust and corrosion. Triple-chromed ABS plastic. Fits 1. 25 in. Eyes can be wired to light-up red. Hitch receivers. And 2 in.
BrandBully #ad
ManufacturerBully #ad
Height3.3 Inches
Length9 Inches
Weight0.79 Pounds
Width5.8 Inches
Part NumberCR-018
Warranty90 Days



MAXXHAUL 70429 Trailer Hitch Cover with 12 LEDs Brake Light

MAXXHAUL #ad - Built-in brake light For added safety when hitch is not in use. Includes a 1/2" Thick gasket provides a snug fit. Fits standard 2" X 2" Hitch receiver. Also includes a hitch pin. 12 bright led's will lasts much longer than regular bulbs.
ManufacturerMaxxHaul #ad
Weight0.91 Pounds
Part Number70429
Warranty90 days

3. Reese


Reese Towpower 86530 Black Finish Chevrolet Bow Tie Lighted Hitch Cover

Reese #ad - Long life LED light source. Low illumination with tail lights on and High illumination with brake lights on. Easy hook up, no tools required. 4-flat connector installed for quick wiring. Fits 1-1/4 inch and 2 inch hitches.
BrandReese #ad
ManufacturerReese Towpower #ad
Height2.5 Inches
Length9.7 Inches
Weight1.05 Pounds
Width4.8 Inches
Part Number86530
Warranty1 Year

4. eVerHITCH


Black, eVerHITCH USA US American Stainless Steel Flag Metal Emblem on Metal Trailer Hitch Cover Fits 2" Receivers

eVerHITCH #ad - Fits standard 2" trailer hitch receivers, - requires hitch pin that is NOT included. Uv resistant, waterproof, Durable enough to last under all weather conditions. Usa us american stainless steel black finish Flag Metal Embossed Emblem on Metal Trailer Hitch Cover. The trailer hitch cover Made of Carbon Steel, the emblem made of Stainless Steel. Fits 2" Receivers. Brand new, top quality. Front plate size 4x3 inches.
BrandeVerHITCH #ad
ManufacturereVerHITCH #ad
Part NumberEVER4544

5. Bully


Bully CR-007XL Universal Extra Large Tow Hitch Cover/Receiver Trailer Plug in Black with LED Brake Light with No Manufacturer Logo or Emblem, Car, SUV and Truck Accessories

Bully #ad - Adds visibility to the rear of your vehicle. Works as brake lights, hazard lamps, running lights, and turn signals. Fits 2” hitch receivers. Installs in seconds/includes standard 4-way electrical connector.
BrandBully #ad
ManufacturerBully #ad
Height12.4 Inches
Length4.5 Inches
Weight1 Pounds
Width4.75 Inches
Part NumberCR-007XL

6. Bully


Bully CR-402L Chrome Boat Propeller Funny Trailer Truck Towing Hitch Receiver Cover with Plug In LED Brake Lights for Chevy, Toyota, Ford, GMC, Dodge, and Others

Bully #ad - Spins freely in the wind as you drive. Protects hitch systems from rust and corrosion. Fits 2” or 1-1/4” hitch receivers. Triple chrome plated ABS plasic.
BrandBully #ad
ManufacturerBully #ad
Height9.6 Inches
Length5 Inches
Weight0.85 Pounds
Width8 Inches
Part NumberCR-402L

7. Bully


Jeep, Toyota, Dodge RAM, GMC, Bully BBS-1104L Black Bull Series Heavy-Duty Rugged Towing Truck SUV Bumpstep Hitch Step Protector with LED Brake Light Universal Fit Hitch Mount for Trucks from Chevy Chevrolet, Ford

Bully #ad - When hooked up via the included 4-pin connector, the LEDs will also flash along with hazard lights. Once secured, the lighted hitch cover provides access to your truck bed, roof racks, and in the case of an SUV, the rear cargo area.

Sturdy, ample step- the 100% steel tube step measures 19” wide and 3. 75” in diameter, with a high-impact, anti-skid step pad. Universal fit for most hitch receivers - fits 2” and 1-1/4” hitch receivers includes reinforced plastic adapter, which are the most common sizes. Provides easy access - to truck beds, roof racks and sUV interiors. Lets other drivers see you - the lighted hitch cover features LED brake lights to provide added visibility for other drivers. Easy to install - Installs in minutes/includes plug-and-play wire harness.
BrandBully #ad
ManufacturerBully #ad
Height3.75 Inches
Length11.3 Inches
Weight5.64 Pounds
Width18.75 Inches
Part NumberBBS-1104L



JIAYI Trailer Hitch Cover Tube Plug Insert,Receiver Tube Hitch PlugFits 2" Receivers

JIAYI #ad - Keep out mud, will keep the winter snow and ice outside, Dirt. Simply push it right on your hitch and you are ready to go! It features a bracket to be permanently mounted over the receiver tube to prevent misplacing the cover when not in use. The plug manufactured from durable black Rubber,the design is tough and durable. No pin or clip required to hold in place, Installs in Seconds. Trailer hitch cover Plug Insert, Fits standard 2" trailer hitch receivers. Protects receiver tube when not in use, rather than inside.
BrandJIAYI #ad
ManufacturerJIAYI #ad
Part NumberA202

9. Roane Designs


Reverse Trailer Hitch Light, Driving, Roane Designs 3" LED Tow Hitch Cover Light, fits 2" inch Receiver Hitch, Brake

Roane Designs #ad - To enable the reverse led function you splice the white wire into your car's reverse light bulb's positive wire. Reverse brake light will not work if you do not connect the white wire to your vehicle. All-in-one design- this 80 led and 9 led reverse bulb - 3 x 3” hitch cover light that provides driving, brake, and reverse Lamp that works all together.

May require a voltage stabilizer to use this product. Warning** professional installation require- installs in minutes/includes plug-and-play wire harness that requires a standard 4 way flat plug. These additional LED bulbs helps provide brighter and additional visibility for other drivers. Fully tested – fully tested and manufacturer with premium grade abs plastic and advance LED technology. We do not believe in using CHEAP materials and guarantee all our products.

Please make sure to read the instructions and warning on images to ensure proper installation. Do not settle for just a basic hitch cover light that only has one function or only 9-15 LED. Universal fitment- for most hitch receivers - fits 2 x 2 hitch receivers”. Note: may not be compatible for vehicles with originalOEM or aftermarket LED tail lamps. If you have a newer car with LED lights, please contact us to make sure that this will work with your vehicle.
BrandRoane Designs #ad
ManufacturerRoane Products Group #ad
Height3.5 Inches
Length5 Inches
Width3.5 Inches
Part NumberRR21001
Warranty1 Year

10. IPS


Led Trailer Hitch Cover with Backup Led Reverse Light Automotive Accessories 80 LED Lights 2 Inch Hitch Receiver Cover 4 Way Plug Truck SUV Accessories led Trailer Lights

IPS #ad - 3"x3" hitch receiver cover with 80 leds dim driving light and brighter brake light when brakes are applied and 9 LEDs when it is put in reverse to provide additional measure of visibility for other drivers.

Locking pin is required not included Requires hard wiring to activate the reverse light. Fits 2"x2" class 3 hitch receiver and uses the standard 4 way flat plug. Made out of high impact ABS housing and designed to provide protection for the hitch receivers from water and dirt. Add a functional feature which provides style and safety using the latest LED technology. Requires hard wiring to reverse light.
BrandIPS #ad
ManufacturerIPS #ad
Part NumberIPS-RR21001