Top 10 Hi Lift Jack Base – Floor Jacks

As an Amazon Associate I earn from qualifying purchases.

1. Seven Sparta

#ad

Seven Sparta Off-Road Base Compatible with Hi Lift Jack PP Pad to Alleviate Jack Hoisting Sinkage Red

#ad
Seven Sparta #ad - Give the off-road Base better footing and greater stability during the lifting process. Heavy duty and easy to carry: made of a tough pp synthetic material, better more than a chunk of wood will not rot or break.

No-risk purchase! unconditional 30-day money-back guarantee. If you’re unsatisfied with this item for any reason, we’ll immediately refund your purchase price. A drilled hole in center of base attached to your jack bar, store it easy. Do not fit for posT POPPER Jack. One side with serrated teeth: helps to scrape at hard dirt or gravel, to create a clean, flat surface for the base to sit on while in use.

Compatible with most hi-lift jacks:designed and used for most of hi-lift jacks, cast/steel jack, X-TREME Jack, Patriot Edition Jack, UTV Jack, Includes model All-Cast Jack, Equipment/Agriculture JackEJ-550. Alleviate jack sinkage on soft ground: Used on soft ground like sand, mud, grass.
BrandSeven Sparta #ad
ManufacturerSeven Sparta #ad
Part Number122801

2. Hi-Lift

#ad

Hi-Lift ORB Off Road Base

#ad
Hi-Lift #ad - Drilled hole in center of base for convenient storage on jack bar. Alleviates jack sinkage on soft surfaces. Compatible with all standard Hi-Lift brand jacks. Fit type: Universal Fit. Serrated teeth along one side helps scrape or level ground for base. This item is not compatible with the First Responder Jack by Hi-Lift. Rugged construction for strength and durability.
BrandHi-Lift #ad
ManufacturerHi-Lift #ad
Height3 Inches
Length12 Inches
Weight2.9 Pounds
Width12 Inches
Part NumberORB
ModelORB
Warranty12 months from the date of purchase, only to the original owner, against defective materials and workmanship.

3. Seven Sparta

#ad

Seven Sparta Base Stand & Handle Keeper Compatible with Hi Lift Jack Accessories Handle Bar Protector

#ad
Seven Sparta #ad - Do not fit for posT POPPER Jack. Alleviate jack sinkage on soft ground: Used on soft ground like sand, mud, grass. Handle keeper for securing jack: this handle bar is a must have item used to keep jack handle in place, when you install the jack in your truck bed or to the side during transportation and storage, especially off-roading or on the highway.

This set of handle keeper & jack base compatible with most jacks: designed and used for most of jacks, UTV Jack, Cast/Steel Jack, Includes model All-Cast Jack, Patriot Edition Jack, X-TREME Jack, Equipment/Agriculture JackEJ-550. Heavy duty & solid material: the jack stand is made of a tough PP synthetic material, better more than a chunk of wood will not rot or break.

Eliminate noise & friction: handle bar does eliminate rattling and avoids friction and rubbing between the Jack or truck body, no rattling while driving. This handle bar keeper is crafted from durable rubber, which is rustproof and solid. Give the off-road Base better footing and greater stability during the lifting process.
BrandSeven Sparta #ad
ManufacturerSeven Sparta #ad
Part NumberJack Base with Black Jack Handle-Keeper

4. C&T

#ad

C&T Jack Base and Handle Keeper Compatible with Hi Lift Jack Accessories Handle Bar Protector,2 Piece,Off Road Base,Red & Black,Alleviate Jack Hoisting Sinkage

#ad
C&T #ad - Gives your jack better footing and greater stability during the lifting. Use it on soft ground like sand, mud, grass, etc. Suitable for most jacks, please check the size and specification before purchasing. The set includes a handle bracket and jack base. Amazon warehouse direct shipping, fast delivery. Made of high-grade materials, to create a clean, the handle and base are durable. One side with serrated teeth can Helps to scrape at hard dirt or gravel, flat surface for the base to sit on while in use.
BrandC&T #ad
ManufacturerC&T TOOLS #ad
Part NumberCT016

5. YIYITOOLS

#ad

Off Road Base, Red & Black,Alleviate Jack Hoisting Sinkage,Accessories Handle Bar Protector YN-1-001, YIYITOOLS Jack Base and Handle Keeper Compatible, 2 Piece

#ad
YIYITOOLS #ad - The set includes a handle bracket and jack base. Amazon warehouse direct shipping, fast delivery. Suitable for most jacks, please check the size and specification before purchasing. Use it on soft ground like sand, mud, grass, etc gives your jack better footing and greater stability during the lifting. Made of high-grade materials, the handle and base are durable.
BrandYIYITOOLS #ad
ManufacturerCHANGZHOU SMART WEALTH TRADING CO.,LTD #ad
Height1.7 Inches
Length4.7 Inches
Weight3.5 Pounds
Width4.5 Inches
Part NumberYN-1-001
ModelYN-1-001

6. ROCCS

#ad

ROCCS Jack ORB Off- Road Base Fit for Hi Lift Jack/Sky Jack/Trail Jack to Alleviate Jack Hoisting Sinkage

#ad
ROCCS #ad - Thick & bright color: the widened bottom plate is suitable for use on soft ground to prevent the jack from sinking and slipping; The bottom is hexagonal which increases the contact area between the base and the ground, it is more stable and does not slip during use.

Easy to store and carry: it can be stored under the seats or put the Hi Lift Jack base in the trunk. This base was enough to keep the Hi-Jack from slipping and sinking into the mud while you are hoisting the vehicle. The red color is very easy to be found in the mud, you won't lose it. Note: d0es not fit for smittybilt 2722 & hi lift Jack PP-300 Post Popper. Compatibility: this off raod base compatible with most hi lift jacks, X-TREME Jack, Patriot Edition Jack, cast/steel jack, like all-cast jack, utv jack, Equipment/Agriculture JackEJ-550.

With serrated teeth: use the teeth to level out the ground before Jacking, the jagged edge helps to scrape at hard dirt or gravel, to create a clean, flat surface for the base to sit on while in use. Quality material & heavy duty: made of a tough pp synthetic material, thick and sturdy materials. Also a drilled hole in center of base attached to your jack bar.
BrandROCCS #ad
ManufacturerROCCS #ad
Part NumberHi-Lift Jack Base

7. ZESUPER

#ad

ZESUPER Off-Road Base High Lift Jack Base Plate Compatible with Hi Lift Jack PP Pad to Alleviate Jack Hoisting Sinkage Red

#ad
ZESUPER #ad - If you have any question, please free contact us. Gives the off-road foundation better foundation and greater stability during the lift, clay, reducing skidding. Not suitable for POST POPPER Jack.

Purchase risk free! an unconditional 30-day money back guarantee. Tough and light material made of a tough synthetic PP material, is better than large piece of wood, does not decay or fracture. Reduce the impact of soft ground suitable for sand, grass and other soft ground. Nylon hexagon shape reduces slipperyThe whole nylon hexagonal shape, when the base is placed on the ground, the shape can increase the friction, to avoid the error caused by slippery. High compatibility compatible with most hi-lifting jacks, X-ray TREME jack UTV jack, patriot version of jack, including model all casting cast jack, jack, equipment/agriculture jack EJ - 550.
BrandZESUPER #ad
ManufacturerZESUPER #ad
Weight3.15 Pounds
Part NumberUSAM-SPHB001

8. Seven Sparta

#ad

Seven Sparta Handle Keeper Compatible with Hi Lift Jack Accessories Handle Bar Protector

#ad
Seven Sparta #ad - Corrosion resistant material: this handle bar keeper is crafted from durable rubber, which is rustproof and solid. Do not fit for posT POPPER Jack. Eliminate noise & friction: it does eliminate rattling and avoids friction and rubbing between the Jack or truck body, no rattling while driving.

Handle keeper for securing jack: this handle bar is a must have item used to keep jack handle in place, when you install the jack in your truck bed or to the side during transportation and storage, especially off roading or on the highway. Fit almost jack: fit most of hi-lift jacks, cast/steel jack, X-TREME Jack, patriot Edition Jack, utv jack, includes model all-cast jack, Equipment/Agriculture JackEJ-550. Easily and quickly installing or removing: this set can be easily installed or removed without any hassle.
BrandSeven Sparta #ad
ManufacturerSeven Sparta #ad
Part NumberSeven Sparta-Handle-Keeper

9. Reese

#ad

Reese Towpower 7048400 Farm Jack Foot Plate, Black, 10in. 10in. x 1in.

#ad
Reese #ad - Rugged polypropylene plastic. Removable locator ring. 10 inches by 10 inches by 1 inch. Provides increased stability. 7, 000 pounds capacity.
BrandReese #ad
ManufacturerReese Towpower #ad
Height9 Inches
Length11 Inches
Weight1 Pounds
Width7 Inches
Part Number7048400
Model7048400
Warranty1 Year

10. Hi-Lift

#ad

Hi-Lift Jack HK-B Black Handle-Keeper

#ad
Hi-Lift #ad - Molded in black. Easily slips on and off for quick, no hassle removal when you need to use your jack. The hi-lift handle-keeper holds the hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage. Unique design allows Handle-Keeper to be removed without taking off the top clamp-clevis. Crafted from rugged polyurethane material.
BrandHi-Lift #ad
ManufacturerARB #ad
Height1.5 Inches
Length9 Inches
Weight0.35 Pounds
Width4.5 Inches
Part NumberHK-B
ModelHK-B
Warranty0