As an Amazon Associate I earn from qualifying purchases.

Dimension:2. 25" inlet x 2. 5" outlet x 5. 5"length. Compatible : fit for 2 " or less 2" outer diameter tailpipes. Please measure your car's tailpipe diameter, and make sure your tailpipe outlet diameter is 2 inch or less than 2 inch.
This one is suitable for straight exhaust pipes. Anti-rust material: this exhaust tip is made of high-quality stainless steel material, and there is a drainage hole on bottom of tip design to drain water, finished rolled edge, not easy to accumulate water and prevent rust. Noteplease check your original tailpipe's type.

Universally compatible with vehicles which have exhaust pipes with an outlet diameter of 1-2. 5 inches. Not just make it louder: thicker inner wall design makes your vehicle sounds rumble and crackle, enjoy the driving pleasure brought by the sounds.
Notice: please measure the outlet diameter of your pipe prior before purchase this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip 1-2. 5 inches. Stylish look: stainless steel material made with chrome-plated finishing provides a stylish look for your vehicle instead of the rusted old tailpipe.

Dimension: standard 1.
0-inch before purchase. Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M10 Wrench, no drilling or welding needed. We recommend to do above action once a month NOTE: Professional installation would be highly recommended. Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.




Dimension: standard 1. 5"-2. 5" x 4" x 9" inlet, outlet, and overall length; universal fit for most vehicles with 1. 5"/1. 75"/2. 0"/2. 25"/2. 5" outlet diameter exhaust pipes Please make sure the outlet outer diameter of your vehicle tailpipe is between 1.
We recommend to do above action once a month NOTE: Professional installation would be highly recommended. Daily maintenance: to make this exhaust tip has a long-life service - Please Sweep away the welding debris, putty, white ash, oil, cement, sand ash regularly to keep the surface clean.


1. Tritrust
#ad
Exhaust tip, To Fit 1.5 to 2 Inch Exhaust tail Pipe Diameter- Stainless Steel to give chrome effect, Car Muffler tips
#adTritrust #ad - Please measure your own pipe and bumper cutout, and compare to this product fitment size. Clamp-on and bolt-on installation : They are attached to the tailpipe by clamps or screws Included.More information #ad
Size : / width 2. 5'' / inlet diameter 2 3/8'' / length 5 3/4 '' / Outlet Diameter 2.5''. This exhaust tips fit pipes measuring between 1. 5 and 2 inches in diameter. This muffler tips are made by high quality stainless steel and won’t change the sound or function of your car.Brand | Tritrust #ad |
Manufacturer | YLC PRODUCT #ad |
Part Number | T00027 |
More information #ad
2. GSAEX
#ad
2 Inch Outlet For Car Tailpipe, Stainless Steel Chrome Resonated Muffler Tips, GSAEX Exhaust Tips ,2.25" Inlet 2.5" Outlet 5.5" Long Exhaust Tailpipe Bolt-On Design, Fit for 1.5
#adGSAEX #ad - Straight tailpipe is for straight type, and curved tailpipe is for curved type. Firm & tight:2 screws bolts design, and 1. 2mm wall thickness can prevent the screw from slipping, tightly fixed to the tailpipe, never worry the exhaust tips fall off.Dimension:2. 25" inlet x 2. 5" outlet x 5. 5"length. Compatible : fit for 2 " or less 2" outer diameter tailpipes. Please measure your car's tailpipe diameter, and make sure your tailpipe outlet diameter is 2 inch or less than 2 inch.
More information #ad
Easy to installation just tighten the screws and fix the bolt, you can easily fix the exhaust tips to the tailpipe, no need replace any parts. This one is suitable for straight exhaust pipes. Anti-rust material: this exhaust tip is made of high-quality stainless steel material, and there is a drainage hole on bottom of tip design to drain water, finished rolled edge, not easy to accumulate water and prevent rust. Noteplease check your original tailpipe's type.
Brand | GSAEX #ad |
Manufacturer | Generic Automotive Supplies #ad |
Height | 2.25 Inches |
Length | 5.5 Inches |
Width | 2.5 Inches |
Part Number | A5X |
Model | A5X |
Warranty | 90 |
More information #ad
3. AUTOSAVER88
#ad
AUTOSAVER88 Adjustable 2.5 Inch Inlet Exhaust Tip, Stainless Steel Exhaust Pipe Tips for 1.5"/1.75"/2"/2.25"/2.5" Outside Diameter Tailpipe, Chrome, Bolt On, 1.0"-2.5" Inlet 3.5" Outlet 6" Long
#adAUTOSAVER88 #ad - Effective protect your tailpipe from dust, rain and rocks, also Prevent it from deformation and damage. Dimension: standard 1. 0"-2. 5" x 3. 5" x 6" inlet, outlet, and overall length respectively. Also the bolt-on design make it super easy to fastens to your exhaust pipe without any hassle.Universally compatible with vehicles which have exhaust pipes with an outlet diameter of 1-2. 5 inches. Not just make it louder: thicker inner wall design makes your vehicle sounds rumble and crackle, enjoy the driving pleasure brought by the sounds.
More information #ad
We recommend to do above action once a month NOTE: Professional installation would be highly recommended. Daily maintenance: to make this exhaust tip has a long-life service - Please Sweep away the welding debris, putty, oil, cement, white ash, sand ash regularly to keep the surface clean. Notice: please measure the outlet diameter of your pipe prior before purchase this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip 1-2. 5 inches. Stylish look: stainless steel material made with chrome-plated finishing provides a stylish look for your vehicle instead of the rusted old tailpipe.
Brand | AUTOSAVER88 #ad |
Manufacturer | AUTOSAVER88 #ad |
Height | 3.5 Inches |
Length | 6 Inches |
Weight | 1.41 Pounds |
Width | 2 Inches |
Part Number | J034 |
Model | TSET-0030 |
Warranty | 1 Year Warranty |
More information #ad
4. AUTOSAVER88
#ad
AUTOSAVER88 Adjustable 1.5-2.0 Inch Inlet Exhaust Tip, 1.5"-2" Inlet 3.5" Outlet 9" Long Chrome Plated Stainless Steel Exhaust Tail Tip for 1.5"/1.75"/2.0" Outside Diameter Tailpipe, Polished, Bolt-On
#adAUTOSAVER88 #ad - Daily maintenance: to make this exhaust tip has a long-life service - Please Sweep away the welding debris, oil, putty, white ash, cement, sand ash regularly to keep the surface clean. Stylish & pleasant-sounding: sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound; meanwhile, the Chrome Polished Finish makes your car with a shine brightly and nice appeal.Dimension: standard 1.
More information #ad
5"-2. 0" x 3. 5" x 9" inlet, outlet, overall length; only universal fit for vehicles with 1. 5"/1. 75"/2. 0" outside diameter exhaust tailpipes Please make sure the outside diameter of your car tailpipe is between 1. 5-inch and 2. 0-inch before purchase. Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M10 Wrench, no drilling or welding needed. We recommend to do above action once a month NOTE: Professional installation would be highly recommended. Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
Brand | AUTOSAVER88 #ad |
Manufacturer | AUTOSAVER88 #ad |
Height | 3.5 Inches |
Length | 9 Inches |
Weight | 1 Pounds |
Width | 1.5 Inches |
Part Number | EXT067 |
Model | TSET-0053 |
Warranty | 1 Year Warranty |
More information #ad
5. WESDON
#ad
Exhaust Turn Down Exhaust Tip 2.25" Diameter X 9.00" Long 2.00" Inlet Turn Down Chrome Plated WTD22509-200 Wesdon Exhaust Tip
#adWESDON #ad - Please measure your exhaust pipe to make sure you have a 2. 00” exhaust pipe outlet and that you have the room for it to fit. Weld on style fits a Exhaust Pipe 2.More information #ad
00 inlet. This is made to fit a 2. 00” exhaust pipe. 2. 00 inch inlet dia 9. 00 in long turn Down Weld On Exhaust Tip. 2. 25 inch diameter pipe 9. 00 inches long this does noT FIT A 2. 25 od pipe. Nickel Chrome Plated.Brand | WESDON #ad |
Manufacturer | Wesdon #ad |
Height | 2 Inches |
Length | 9 Inches |
Width | 2 Inches |
Part Number | WTD22509-200 |
Model | WTD22509-200 |
More information #ad
6. Tritrust
#ad
Car Muffler Tips, Exhaust tip, to Fit 1.5 to 2 Inch Exhaust Tail Pipe Diameter- Stainless Steel to give Chrome Effect
#adTritrust #ad - Clamp-on and bolt-on installation : They are attached to the tailpipe by clamps or screws. This muffler tips are made by high quality stainless steel and won’t change the sound or function of your car.More information #ad
Please measure your own pipe and bumper cutout, and compare to this product fitment size. Size : / inlet diameter 2 3/8 '' / width 2. 5'' / length 6. 5 '' / outlet Diameter 2. 5''. This exhaust tips fit pipes measuring between 1. 5 and 2 inches in diameter.Brand | Tritrust #ad |
Manufacturer | Tritrust #ad |
Part Number | T00114 |
More information #ad
7. Tritrust
#ad
Pack of 2 Exhaust tips, to Fit 1.5 to 2 Inch Exhaust Tail Pipe Diameter- Stainless Steel to give Chrome Effect, Car Muffler Tips
#adTritrust #ad - Please measure your own pipe and bumper cutout, and compare to this product fitment size. This exhaust tips fit pipes measuring between 1. 5 and 2 inches in diameter. Clamp-on and bolt-on installation : They are attached to the tailpipe by clamps or screws.More information #ad
Size : / width 2. 5'' / inlet diameter 2 1/4 '' / length 5. 5 '' / outlet Diameter 2. 5''. This muffler tips are made by high quality stainless steel and won’t change the sound or function of your car.Brand | Tritrust #ad |
Manufacturer | Tritrsust #ad |
Part Number | T00118-2 |
More information #ad
8. AUTOSAVER88
#ad
1.5"-2.5" Inlet 4" Outlet 9" Long Chrome Finish Stainless Exhaust Tip for 1.5"/1.75"/2.0"/2.25"/2.5" Outside Diameter Tailpipe, AUTOSAVER88 Adjustable 1.5-2.5 Inch Inlet Exhaust Tip, Bolt-On, Polished
#adAUTOSAVER88 #ad - Stylish & pleasant-sounding: sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound; meanwhile, the Chrome Polished Finish makes your car with a shine brightly and nice appeal.Dimension: standard 1. 5"-2. 5" x 4" x 9" inlet, outlet, and overall length; universal fit for most vehicles with 1. 5"/1. 75"/2. 0"/2. 25"/2. 5" outlet diameter exhaust pipes Please make sure the outlet outer diameter of your vehicle tailpipe is between 1.
More information #ad
5-inch and 2. 5-inch before purchase. Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M10 Wrench, no drilling or welding needed. Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well. We recommend to do above action once a month NOTE: Professional installation would be highly recommended. Daily maintenance: to make this exhaust tip has a long-life service - Please Sweep away the welding debris, putty, white ash, oil, cement, sand ash regularly to keep the surface clean.
Brand | AUTOSAVER88 #ad |
Manufacturer | AUTOSAVER88 #ad |
Height | 4 Inches |
Length | 9 Inches |
Weight | 1 Pounds |
Width | 2 Inches |
Part Number | EXT065 |
Model | TSET-0051 |
Warranty | 1 Year Warranty |
More information #ad
9. Tritrust
#ad
Exhaust tip, Car Muffler Tips, to Fit 1.5 to 2 Inch Exhaust Tail Pipe Diameter- Stainless Steel to give Chrome Effect
#adTritrust #ad - Clamp-on and bolt-on installation : They are attached to the tailpipe by clamps or screws Included. Size : / width 2. 5'' / length 5. 5 '' / inlet diameter 2 1/4 '' / Outlet Diameter 2. 5''.More information #ad
Please measure your own pipe and bumper cutout, and compare to this product fitment size. This exhaust tips fit pipes measuring between 1. 5 and 2 inches in diameter. This muffler tips are made by high quality stainless steel and won’t change the sound or function of your car.Brand | Tritrust #ad |
Manufacturer | Tritrust #ad |
Part Number | T00118 |
More information #ad
10. Upower
#ad
Upower Exhaust Tip 2.25" Inlet 3" Outlet 16" Long Weld On Tailpipe 2 1/4" to 3" for Car Trucks Universal Polished Stainless Steel Angle Cut
#adUpower #ad - Designweld on - single Wall - Slant Angle Cut. 1 year warrantyno instruction is included. Professional installation is highly recommended. Dimension2. 25 inch inlet diameter; 3 inch outlet diameter; 16 inch overall length.More information #ad
Materialhigh quality mirror polished 304 Stainless steel. Durable and anti-corrosive, protect the original tips from Sun and Rain, avoid rusting and deformation. Wide applicationuniversal fits 2. 25"2 1/4"inlet diameter car trucks pickup exhaust tail pipe tip.Brand | Upower #ad |
Manufacturer | Partssquare #ad |
Part Number | 186065 |
Warranty | 1 Year |
More information #ad