As an Amazon Associate I earn from qualifying purchases.
TCP Global #ad - Air inlet: 1/4" NPS. Sand blaster with Steel Tip and Sand Recovery Bag. Max. Precise-machined, well-balanced, handy, light weight and sturdy in construction. Pressure: 90 psi 6 Bar. Surface nozzle, inside-Outside Corner Nozzle, Panel Spot Nozzle.
Eastwood #ad - The pressure washer must be capable of delivering a minimum of 3. 5 gpm for Adequate Performance. 1. 27mm i. D. Reinforced Clear Vinyl Suction Hose.
Less water volume will not provide sufficient Force To Allow The Blaster To Adequately Remove Rust And Or Paint. 23 in. 3/8 in. The eastwood liquid media blaster is specifically designed to use high pressure Water From A Gas-Powered Pressure Washer As A Source For Powerful Dust-Free Abrasive Blasting To Tackle Tough Cleaning Jobs Without The Use Of Elbow Grease.
AUTOOL #ad - That is why we need autool hTS558 to clean carbon deposition in intake pipe. It show high performance in hardness, anti-pressure and wear-resisting. Autool hts558- a special machine for engine intake pipe and intake valve back side clean.
This is a closed loop. Walnut powder will impact carbon deposition on inner wall of intake pipe. Warehouse. These residues change into hard black shell in high temperature condition, that called carbon deposition. So normally we should clean carbon deposition after every 40000-50000 KM.
Carbon deposition will decrease air-fuel ratio, engine drastic shake on idle status. All the thing will hurt engine deeply. Engine should be closed before clean, then turn crankshaft to close intake valve. Autool hts558 clean one intake pipe each time, 6 cylinder engine should cleaned 6 times one by oneand so on. Walnut powder hardness was lower than metal but higher than carbon deposition.
Eastwood #ad - Pressurized oil lubrication system assures 100, 000 hour pump life. Professional grade: direct drive motor and pump eliminates belt noise, slippage and dust. Quieter than your air tools.
Powerful performance: 1750 rpm industrial scroll pump produces 12. 7 cfm - enough air for small production shop. Quiet technology: as low as 63dbs at 1 meter - No louder than a typical conversation. Plenty of air: the 1750 rpm industrial grade scroll pump produces 12.
Performance Tool #ad - Gravity feed: Allows for constant flow of blasting material. Ideal use: combine with air compressor to remove rust, corrosion, graffiti, paint, and scale. Compatibility: works with any abrasive, glass beads, steel grit, sand, like silica, and pecan shells.
QPKING #ad - 3 year warrantyfor damage caused by non-human factors, we promise to resend parts for free within 3 years. Integrated designThe walnut sand grit can be sprayed and recovered simultaneously.
Deep removal of carbon depositsdeeply remove the highly sticky carbon deposits on the intake manifold, insufficient fuel combustion, intake & exhaust valves.
HOLDWIN #ad - Suitable for sandblasting and derusting the surface of industrial machinery parts and castings such as machinery and metallurgical casting. Can use a variety of sandblasted media such as glass beads, brown corundum, garnet, soda water, walnut shell.
1. TCP Global
#adTCP Global Brand Air Sand Blasting Gun with Sand Recovery System Includes Abrasive
#adMore information #ad
| Brand | TCP Global #ad |
| Manufacturer | TCP Global #ad |
| Weight | 3.5 Pounds |
| Part Number | SB8048 |
More information #ad
2. Eastwood
#adEastwood Dustless Liquid Media Blaster Brass Blast Gun Assembly 4 Mm Nozzle Installed Double Pick Boron Carbide Nozzle Up Tube Reinforced Clear Vinyl Suction Hose Quick Car Cleaning
#adLess water volume will not provide sufficient Force To Allow The Blaster To Adequately Remove Rust And Or Paint. 23 in. 3/8 in. The eastwood liquid media blaster is specifically designed to use high pressure Water From A Gas-Powered Pressure Washer As A Source For Powerful Dust-Free Abrasive Blasting To Tackle Tough Cleaning Jobs Without The Use Of Elbow Grease.
More information #ad
Male quick-disconnect, High Pressure Water Fitting. 7m x 1/2 in. With all the dangerous solvents, strippers and other chemicals Available To Clean Your Car'S Parts, Sometimes All That'S Needed Is Water And Some High Pressure.| Brand | Eastwood #ad |
| Manufacturer | Eastwood #ad |
| Weight | 3.5 Pounds |
| Part Number | 20668 |
More information #ad
3. AUTOOL
#adAUTOOL HTS558 Automotive Engine Intake Pipe Valve Clean Machine Valvetronic System Walnut Powder Sand Carbon Deposition Cleaner 110V
#adThis is a closed loop. Walnut powder will impact carbon deposition on inner wall of intake pipe. Warehouse. These residues change into hard black shell in high temperature condition, that called carbon deposition. So normally we should clean carbon deposition after every 40000-50000 KM.
More information #ad
Walnut powder is pure natural polish material. High-precision engine system is sensitive to foreign matter of intake pipe, such as bmw valvetronic system. Chemical cleaning agent will corrodes pipe and shortens the lifetime of engine. Carbon deposition will decrease air-fuel ratio, engine drastic shake on idle status. All the thing will hurt engine deeply. Engine should be closed before clean, then turn crankshaft to close intake valve. Autool hts558 clean one intake pipe each time, 6 cylinder engine should cleaned 6 times one by oneand so on. Walnut powder hardness was lower than metal but higher than carbon deposition.
| Brand | AUTOOL #ad |
| Manufacturer | AUTOOL #ad |
| Part Number | HTS558 |
| Model | HTS558 |
More information #ad
4. Buffalo Tools
#adBlack Bull SFSB90 90 Pound Gravity Feed Abrasive Blaster
#adBuffalo Tools #ad - Includes 4 ceramic nozzles, pistol grip blast gun, 8 foot x 3/8 inch blasting hose, and protective hood. Maximum working pressure: 120 psi, air consumption: 7CFM @ 80 psi, Use 80 grit or smaller diameter abrasive.More information #ad
Tank size, gravity feed design, 90 poundscapacity. 10 inch rubber wheels; overall size: 16 inch L x 18 inch W x 36 inch T; weighs 20 pounds. Remove oxidation, paint and rust. Heavy-duty all steel construction, 7. 5 gal.| Brand | Buffalo Tools #ad |
| Manufacturer | Buffalo Tools #ad |
| Height | 36 Inches |
| Length | 18 Inches |
| Weight | 20 Pounds |
| Width | 16 Inches |
| Part Number | SFSB90 |
| Model | SFSB90 |
| Warranty | Parts 90 Days |
More information #ad
5. Eastwood
#adEastwood Elite QST-30 60 Scroll Air Compressor, Powerful, Compact Size
#adPowerful performance: 1750 rpm industrial scroll pump produces 12. 7 cfm - enough air for small production shop. Quiet technology: as low as 63dbs at 1 meter - No louder than a typical conversation. Plenty of air: the 1750 rpm industrial grade scroll pump produces 12.
More information #ad
7 cfm and will be able to handle most air tools and paint guns. Compact and portable: Completely portable so you can take it to the project you are working on. Comparable in noise to your home A/C unit. Innovative technology maximizes air delivery to your tools. Comparable in performance to units costing 3x as much. Cnc machined cast iron pump for extended life and max efficiency.| Brand | Eastwood #ad |
| Manufacturer | Eastwood #ad |
| Weight | 468 Pounds |
| Part Number | 32200 |
More information #ad
6. Performance Tool
#adPerformance Tool M549 Portable Abrasive Blaster Kit
#adMore information #ad
Specifications: minimum air requirement – 3. 5cfm at 50psi; operating pressure – 90 psi; Capacity – 50 lbs; Hose length – 15 feet. Ideal use: perfect for servicing a variety of vehicles, trucks, including cars, farm equipment, and ATVs.| Brand | Performance Tool #ad |
| Manufacturer | Performance Tool #ad |
| Height | 11.5 Inches |
| Length | 21.5 Inches |
| Weight | 5.3 Pounds |
| Width | 5.3 Inches |
| Part Number | M549 |
| Model | M549 |
| Warranty | Lifetime Replacement Hand tools. 1 Year on Air tools. excludes blades, bits, punches, dies, bulbs, fuses, grinding wheels, belts and other consumables which must be replaced under normal use and service. |
More information #ad
7. Eastwood
#adEastwood Pressure Blaster Deadman Valve Abrasive Blasting with Seal Block
#adEastwood #ad - Seal blocks are adjustable for Wear And Last Through 3-4 Hours Of Use. Deadman valve provides a convenient And Safe Way To Control Your Pressure Abrasive Blaster. Blast Hose. Seal block lasts for 3-4 Hours Of Use. 1"-o. D. Spring-Action Handle.More information #ad
| Brand | Eastwood #ad |
| Manufacturer | Eastwood #ad |
| Weight | 2.24 Pounds |
| Part Number | 22007 |
More information #ad
8. QPKING
#adQPKING Automotive Engine Intake Pipe Valve Clean Machine Valvetronic System Walnut Powder Sand Carbon Deposits Cleaner Automotive Cleaning Tools AUTO Engine System Cleaners
#adDeep removal of carbon depositsdeeply remove the highly sticky carbon deposits on the intake manifold, insufficient fuel combustion, intake & exhaust valves.
More information #ad
Solve the problems of unstable idling, and reduced air-fuel ratio. Built-in dust filterIt can separate the recovered walnut sand grit from carbon deposits for recycling. External air sourceThis enables the walnut sand grit to strike the carbon deposits more powerfully and efficiently.| Brand | QPKING #ad |
| Manufacturer | AUTOOL #ad |
| Part Number | HTS668 |
More information #ad
9. HOLDWIN
#adSandblaster Gun Nozzles 10Pcs Tip Sand Blaster Replacement Cylinder Ceramic Abrasive Nozzles for Blasting Pink
#adMore information #ad
Carving and processing of marble and other stones. Packing specification: ceramic nozzle*10 Mainly used for deep processing such as sandblasting and engraving of glass. Durable ceramic sandblast nozzle for injection of medium particles for rapid removal of paint, rust, corrosion and scale.| Brand | HOLDWIN #ad |
| Manufacturer | Hangzhou Huashengtong #ad |
| Height | 1.4 Inches |
| Length | 0.8 Inches |
| Width | 0.8 Inches |
More information #ad
10. Sealey
#adSealey SB951 Shot Blasting Cabinet with Gun
#adSealey #ad - Requires a standard, dry workshop air supply. Supplied assembled and ready for use. Steel cabinet with replaceable viewing screen and internal illumination. Excellent for a wide variety of workshop and bodyshop cleaning applications.More information #ad
Fitted with shot blasting gun and suitable for proprietary brands of glass beads, silicon carbide, aluminium oxide and silica sand only. Dimensions: 640 x 490 x 490mm.| Brand | Sealey #ad |
| Manufacturer | Sealey #ad |
| Height | 20.63 Inches |
| Length | 20.94 Inches |
| Weight | 35.24 Pounds |
| Width | 25.35 Inches |
| Part Number | SB951 |
| Model | SB951 |
More information #ad
