Top 10 1.75 Inch Exhaust Band Clamp – Automotive Replacement Exhaust Clamps

As an Amazon Associate I earn from qualifying purchases.

1. BLACKHORSE-RACING

#ad

BLACKHORSE-RACING 1.75" 1 3/4" Accuseal Clamp Butt Joint Narrow Band Exhaust Seal Clamp

#ad
BLACKHORSE-RACING #ad - Save time and effort: distribute the clamping force evenly over the entire 360° range to prevent leakage and control material deformation. These clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight.

Unique seal and high clamp loads are provided without distorting your exhaust components, effective way to connect exhaust system components such as pipes, allowing the flexibility to disassemble for service. Seal exhaust band clamps is a simple, mufflers and catalytic converters. You would better measure before pruchase. It is easy to install or disassemble with one bolt, saving time and effort. Band width: 1 1/4" 1. 25"; band thickness: 1/16". 0625"; height: 3"; hex Nut: 15mm Metric. Size: minimum diameter: 1 3/4" 1. 75"; maximum Diameter: 2". Available in a wide range of styles and sizes.
BrandBLACKHORSE-RACING #ad
Manufacturerblackhorseracing #ad
Part NumberER39105

2. TOTALFLOW

#ad

TOTALFLOW Natural Finish 1.75" TF-U175 304 Stainless Steel Saddle U-Bolt Exhaust Muffler Clamp-1.75 Inch

#ad
TOTALFLOW #ad - Totalflow is a usa - California based company. 75". Saddle u-bolt exhaust muffler clamp 1. Seal muffler Inlets, outlets, elbow joints, pipe.304 stainless Steel Construction. Made from heavy gauge material. Check product details below for other sizes. Available in a wide range of styles and sizes.
BrandTOTALFLOW #ad
ManufacturerTOTALFLOW #ad
Height3.13 Inches
Length3.5 Inches
Width0.63 Inches
Part NumberTF-U175
ModelTF-U175
WarrantyOne (1) Year Limited Warranty for parts purchased from authorized dealers ONLY, for list of authorized dealers please check the manufacture website: TOTALFLOW warrants the products mentioned above against defects in materials and workmanship for the period set forth below, when they are owned by the original purchaser and remain installed on the vehicle on which they were originally installed. This warranty is void if the product was not installed properly on the vehicle, was installed on a vehicle for which it was not designed, or was removed from the vehicle on which it was originally installed and reinstalled on another vehicle. This warranty shall not apply to normal wear, including interior/exterior sound levels, cosmetic issues such as coatings and material discoloration, any product that was installed on a racing vehicle, installed improperly or contrary to TOTALFLOW instructions, altered, misused, repaired, damaged from an accident, collision, undercarriage road impact or debris, or willful or neglige

3. Ticon

#ad

Supra W2 51mm-55mm Stainless Steel 1.75" T-Bolt Hose Clamp Qty1, 119-05000-1000, Mikalor

#ad
Ticon #ad - Integrated Stanless top slider to prevent hose pinching. 304 stainless Steel Construction. Heavy duty grade 8. 8 bolt hardware with nut free design for easy of use and will never loose those pesky nuts! Fits hose with a 1. 75" or 45mm inner diameter clamp Effective Range: 51mm - 55mm / 2" - 2. 17". 25mm wide band with Tapered edges to prevent the band from cutting into softer silicone hose.
BrandTicon #ad
ManufacturerMikalor #ad
Part Number119-05000-1000
Model03019143

4. HFS

#ad

HFS R Stainless Steel 304 Quick Release V-Band Turbo Downpipe Exhaust Clamp 1.75IN

#ad
HFS #ad - They provide a quicker connect and disconnect At the same time, provide a great seal with even pressure at the flange. Size:1. 75''. Material and structure:each assembly consists of two Mild Steel Male Female flanges and one 304 Stainless Steel V-band clamp, providing a perfect overlap seam for welding.

The exhaust clamp design allows for a gasket free seal. This helps extend the life of the clamp and protects the ability of the fastener. Points for attension: you can use a drop of anti-seize on the clamp’s retaining nut. Application:the v-band clamps/couplings offer effective fastening solutions in exhaust systems, remove intercooler systems and turbo parts, such as charge piping, intake pipes, and heavy-duty exhaust systems, diesel engines, turbochargers, etc.

High performance:one of the advantages of using a v-Band clamp is that these retainers are perfect for applications requiring frequent removal.
BrandHFS #ad
ManufacturerHFS #ad
Part NumberVBAND-FLANGE

5. WYKA

#ad

WYKA 1.75 Inch V-Band Clamp,for Turbocharged Exhaust Down Pipe,Racing Ford Pickup Truck Modified Accessories,1 Pack

#ad
WYKA #ad - P>made of high quality stainless steel, Strong and rustproof, it is very durable. P>. P>this v-band clamp makes it easy to install and remove intercooler systems and turbo parts, such as charge piping, intake pipes, etc. P>. P>style spec: male/female v-Belt Clip w/ Quick Release Clamp. P>. P>the v-belt clip has a machined ridge for the exhaust pipe to fit into for perfect and precise welding. Professional installation is highly recommended. P>. P>size: 1. 75 inch 53. 3mm, color: Silver. P>.
BrandWYKA #ad
ManufacturerWYSW #ad
Height3.15 Inches
Length3.54 Inches
Weight120 Grams
Width0.71 Inches
Part NumberV-Band Clamp Kit

6. Bolt Dropper

#ad

9/16" Wide Band, 3/4" to 1-3/4" Diameter Stainless Hose Clamp, 18-8 S/S 10pc, #20 300 SS

#ad
Bolt Dropper #ad - High quality stainless: bolt dropper hose clamps are 100% 18-8 300 stainless Steel that offer long term durability in the harshest conditions. This high corrosion resistance makes them the perfect choice for use in any environment including marine/saltwater where other fasteners won’t hold up.

They are strong, corrosion resistant and long lasting! Dimensions: trade number: #20 | min. Clamps you can depend on: our clamps offer superior holding power and corrosion resistance. Clamp diameter: 3/4” | max clamp diameter: 1-3/4” | band diameter: 9/16” | Quantity: 10 pcs | Material: 18-8 300 Stainless Steel. Great to keep around: bolt dropper radiator clamps are great to have around for when you need them most! Use in any application, any condition and any environment! Bolt Dropper clamps are the highest quality available on the market and we stand by our claim 100%.

Lifetime guarantee: we are so confident that our product is the best on the market that we offer a NO HASSLE Lifetime guarantee. Whether you are fixing the hose in the garden or securing a marine radiator hose, you can depend on Bolt Dropper clamps to hold and last.
BrandBolt Dropper #ad
ManufacturerBolt Dropper #ad
Part NumberHCSS20-9

7. Mishimoto

#ad

Mishimoto Stainless Steel V-Band Clamp, 1.75" 44.45mm

#ad
Mishimoto #ad - Reusable fabrication nut and quick-release design make fabrication easy. Ideal for stainless steel exhaust, intercooler, and intake piping. Mishimoto Lifetime Warranty. Stainless-steel construction resists rust and corrosion in even the harshest environments. Provides a rigid and secure connection between 1. 75" 44. 45mm pipes.
BrandMishimoto #ad
ManufacturerMishimoto #ad
Height1 Inches
Length4 Inches
Weight0.45 Kilograms
Width4 Inches
Part NumberMMCLAMP-VS-175
ModelMMCLAMP-VS-175
WarrantyLifetime Warranty

8. Squirrelly Performance Parts

#ad

Squirrelly 1.75" Inch Stainless Steel Mandrel Bend Angles Diy Builder V-Band Clamp O2 Sensor Flex Coupler 45/180/90 Degree Header Exhaust Piping Tube Part is Universal

#ad
Squirrelly Performance Parts #ad - Perfect do it yourself kit with plenty of options for your motorcycle, automotive, atv or any other need you may have. Average leg length = 5 1/2". Manufactured right here in the United States. Raw metal finish, true mandrel bent elbows and bends. 1 3/4 inch 304 stainless Steel Grade Piping, 16 Gauge.
BrandSquirrelly Performance Parts #ad
ManufacturerSquirrelly Performance Parts #ad
Part NumberSPP FABKIT-2

9. Three T

#ad

Three T 1-3/4" Stainless Steel Accuseal Clamp Butt Joint Narrow Band Exhaust Seal Clamp Fit for Harley Davidson

#ad
Three T #ad - High-strength fastener hardware with corrosion-resistant coating included. Fitment: for harley. Clamping diameter: 31. 8 mm 1-1/4", clamping diameter imperial: 1-1/4", Clamping Diameter Metric: 31. 8 mm. Package included: 2 X Exhaust Clamps. Feature a 1. 25" wide stainless band with an exclusive reaction block for 360° clamping without muffler or header distortion. 1. 25" wide stainless steel muffler Clamps for Mufflers on 1. 75" headers.
BrandThree T #ad
ManufacturerThree T #ad
Part Number82BFY801

10. Torca

#ad

Torca AccuSeal Heavy Duty Exhaust Band Clamp, 1.75" 430 Stainless Steel

#ad
Torca #ad - Material spec: 430 Bright Stainless Steel. Item id: tas-175-SS. Size spec: 1. 75". Band width spec: 1. 25" 31. 75mm.
BrandTorca #ad
ManufacturerTorca #ad
Height1.75 Inches
Length1.75 Inches
Width1.25 Inches
Part NumberA17BF
ModelA17BF